72518-15111

Faculty Profile

Mr. Sanjeev Kumar Gupta
Asstt. Professor
Institute of Engineering and Technology
Department of Mechanical Engineering

Contact Details:

Email: sanjeev.gupta@gla.ac.in

Contact Number: 9568188288

Area of Research Interest

Thermal and Fluids Engineering, Computational Fluid Dynamics

 

Educational Qualification

2010       M.Tech (Fluids Engineering)             MNNIT, Allahabad, U. P., India.

2008        B.Tech (Mechanical Engineering)       BSACET, Mathura U. P., India

Professional Experience

 

Year

 

Post

College/University

05 Aug 2010 to 17 Jul 2013

Assistant Professor

GLA University Mathura

18 Dec 2013 20 June 2014

Assistant Professor

GLBIET Mathura

15 July 2014 to Till Now

Assistant Professor

GLA University Mathura

 

Academic Achievement and Awards

  1. Qualified GATE examination in B. Tech 3rd year (2007).
  2. Recipient of MHRD monthly scholarship during M. Tech Programme (2008 -2010).
    1. Design an Open Circuit Suction Type Wind Tunnel which is installed in Compressible Flow Laboratory, Department of Applied Mechanics, MNNIT, Allahabad, Uttar Pradesh, India.
    2. Received best paper award during the National Conference on Eco – friendly Manufacturing for Sustainable Development held at GLA University Mathura during17 -19 November 2010.

Academic Projects and Thesis

  1. Completed a thesis on “Study of Hydraulic Jump in Sloping Prismatic Channels” during M. Tech.
  2. Completed a mini project on “Design and Simulation of Open Circuit Suction Type Wind Tunnel” during M. Tech.
    1. Completed a project on “PC Based Spot Welding Machine” during B. Tech.

Undergraduate Project Guided

  1. Design and Simulation of Open Circuit Blow Down Type Wind Tunnel (2012)
    1. Experimental Study of Forced Hydraulic Jump in Horizontal Prismatic Channel (2012)
    2. Design and CFD Analysis of Radial Flow Centrifugal Pump (2015)

Membership of Professional Societies

  1. Life member of National Society of Fluid Mechanics and Fluid Power (LMNSFMFP) governed by Indian Institute of Technology Bombay since January 2010, Membership Number – LM 516.
  2. Life member of Indian Society of Theoretical and Applied Mechanics (LMISTAM) governed by Department of Mathematics, Indian Institute of Technology Kharagpur since October 2012, Membership Number – L750.

Department Level Responsibilities

Member of University Cultural council, Member of Departmental Cultural committee, Member of undergraduate project monitoring team.

Conference/ Workshop Attended

International Conference – 08, National Conference – 07, Workshop Attended – 02, Workshop Conducted - 05

Number of Research Papers and Chapter in Book Published

International Journal – 04, National Journal – 01, International Conferences – 18, National Conferences – 22, Chapters in Books – 3

WORKSHOP ATTENDED

  1. Attended one week coordinator’s workshop on Fluid Mechanics from 11th to 15th March 2014 at IIT Kharagpur under the National Mission on Education through ICT (NMEICT) supported by Ministry of Human Resources and Development (MHRD) Government of India.
  2. Attended two week ISTE workshop on Computational Fluid Dynamics (CFD) from 12th to 22nd June 2012 at remote centre Jaipur Engineering College Kukas, Jaipur under the National Mission on Education through ICT (NMEICT) supported by Ministry of Human Resources and Development (MHRD) Government of India, organized by Indian Institute of Technology (IIT) Bombay

WORKSHOP AND STTP CONDUCTED

  1. Organized one – day STTP on Investment Casting on 23 February 2016, jointly organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura and Ministry of MSME – Technological Development Centre Agra Govt. of Ind. (Role: Organizing Secretary and CO –Convener)
  2. Organized two – day workshop on UAVs & Amphibious Drone Technology technically supported by American Society of Mechanical Engineers (ASME) from 25 -26 September 2015, organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura. (Role: Organizing Secretary and CO –Convener)
  3. Organized two – day workshop on Analysis of Fluid Flow and Heat Transfer Problems with ANSYS – CFX technically supported by American Society of Mechanical Engineers (ASME) from 14 -15 March 2015, organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura. (Role: Organizing Secretary and CO –Convener)
  4. Conducted two week ISTE workshop on Fluid Mechanics from 20th to 30th May 2014 at remote centre G L Bajaj Group of Institutions, Mathura under the National Mission on Education through ICT (NMEICT) supported by Ministry of Human Resources and Development (MHRD) Government of India, organized by Indian Institute of Technology (IIT) Kharagpur.  (Role: Workshop Coordinator)
  5. Conducted training session during two – day workshop on Software Enabled Analysis of Fluid Flow Problems from 02nd to 3rd March 2013, organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura.

CONFERENCE ATTENDED

  1. International Conference on Trends in Industrial and Mechanical Engineering (IC TIME 2016), MANIT Bhopal, MP, 04 – 06 February 2016.
  2. National Conference on Product Design & Manufacturing (NCPDM 2015), Motilal Nehru National Institute of Technology Allahabad, 21- 22 November 2015.
  3. Nirma University International Conference on Engineering (NUiCONE 2012), Nirma University Ahemdabad, 06 -08 December 2012, Gujarat.
  4. International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, 10 -12 November 2011
  5. 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), S. V. NIT Surat, Gujarat, 6 – 8 June 2011
  6.  International Conference on Recent Trends in Engineering, Technology & Management, BIET, Jhansi, 26 – 27 February 2011
  7. International Conference on Education Awareness for Social Sector Issues in India, TIMES, Aligarh, 24th July 2011.
  8.  5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2010), Department of Aerospace Engineering, IIT Kharagpur, 27 – 29 December 2010
  9. 2nd International Conference on Climate Change and Sustainable Management of Natural Resources, IASCA, ITM Universe Gwalior, 5 – 7 December  2010

10. National Conference on Competitive Manufacturing: Strategies and Decision Support Systems, GLA University, Mathura, 5 – 6 November 2011.

11. National Conference on Emerging Trends  in Mechanical Engineering, Faculty of Engineering & Technology, RBS College Bichpuri, Agra, 17 - 18 September 2011.

12. National Conference on Recent Advances in Mechanical Engineering, BSA College of Engineering and Technology, Mathura, 25 – 26 March 2011.

13. National Conference on Eco – friendly Manufacturing for Sustainable Development, GLA University Mathura, 19-21 November 2010.

14. Golden Jubilee National Conference on Modeling and Simulation in Heat Transfer and Fluid Flow (MSHTFF), NIT Jamshedpur, 9-10 July 2010.

PAPER AND CHAPTER IN BOOK PUBLISHED

Chapter in Books

  1. DeeptiSoni, Bhupendra Singh, Sanjeev Kumar Gupta, Vijay Kumar Dwivedi,  2012, “Reorienting Existing Indian Education  for Sustainable Development of Society and Nation”, Education in Emerging Indian Society, Chapter – 15, Page No. 135 – 143, ISBN: 978 – 81 – 313 – 1326 – 8.
  2. Stuti Sharma, RukhsarGauri, Sanjeev Kumar Gupta, Vijay Kumar Dwivedi, 2012, “Present Scenario of Female Education in India and its Scope of Development”, Educational Development, Chapter -29, Page No. 300 – 307, ISBN: 978 – 81 – 313 – 1318 – 3.
  3. Pankaj Tiwari, Jitendra Kumar Dixit, Sanjeev Kumar Gupta, Pratibha Singh, Harshit Gupta, 2012, “Educated Unemployed: A New Challenge before India”, Education System, Chapter – 05, Page No. 36 – 43, ISBN: 978 – 81 – 313 – 1324 – 4.

International Journal

  1. V. K. Dwivedi, Sanjeev Kumar Gupta, November 2015, “Minimizing Heat Loss during Boiler Operation: A Case Study”, BLB International Journal of Science & Technology, pp: 318 – 324, ISSN: 0976-3074.
  2. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, 25 April 2013, “Modeling of Relative Length and Relative Energy Loss of Free Hydraulic Jump in Horizontal Prismatic Channel”, Procedia Engineering, Elsevier, Vol/Issue: 51C, pp: 529–537, ISSN: 1877- 7058.
  3. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, Ajay Pratap Singh, January – June 2011, “Modeling of Sequent Depth Ratio and Relative Height of  the Hydraulic Jump in Horizontal Prismatic Channels”, International Journal of Advances in Thermal Science and Engineering,  International Science Press, Serial Publication, New Delhi, Vol. 2, No.2, Page No. 73 – 78, ISSN: 0976 – 6820.
    1. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, July – Dec 2010, “Modeling of Hydraulic Jump Characteristics in Sloping Prismatic Channels for Design and Manufacturing of Stilling Basin”, International Journal of Manufacturing Technology and Research, Vol. 6, No.2, Page No. 37 – 41, ISSN: 0973 – 0281.

National Journal

  1. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, December 2011, “Modeling of Relative Height of  Hydraulic Jump in Horizontal Prismatic Channel using C Programming”, Journal of the Instrument Society of India, Vol: 41, No: 4, pp: 248 – 250, ISSN: 0970 - 9983.

 

International Conferences

  1. Sanjeev Kumar Gupta, V. K. Dwivedi, Shubham Sachdeva and Shashank Singh, 04 – 06 February 2016, “Investigation of Coefficient of Skin Friction and Axial Velocity of Fully Developed Turbulent Flow through Pipe”, International Conference on Trends in Industrial and Mechanical Engineering (IC TIME 2016), MANIT Bhopal, MP, and TEQIP II, Vol. II, Page No. 282 – 287, ISBN: 978 – 93 – 84935 – 66 – 5.
  2. Sanjeev Kumar Gupta, V. K. Dwivedi, 04 – 06 February 2016, “Dissipation Index and Efficiency of Free Hydraulic Jump in Horizontal Prismatic Channel: An Experimental Approach”, International Conference on Trends in Industrial and Mechanical Engineering (IC TIME 2016), MANIT Bhopal, MP, and TEQIP II, Vol. II, Page No. 254 – 260, ISBN: 978 – 93 – 84935 – 66 – 5.
  3. Sanjeev Kumar Gupta, V. K. Dwivedi, Jitendra Kumar Chauhan, Anish Singh & Rahul Goswami, 09 – 12 December 2012, “Design and Simulation of Open Circuit Blow Down Type Wind Tunnel”, Fourth International Congress on Computational Mechanics and Simulation (ICCMS 2012), IIT Hyderabad, A.P., Paper ID: 115.
  4. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, 06 -08 December 2012, “Modeling of Relative Length and Relative Energy Loss of Free Hydraulic Jump in Horizontal Prismatic Channel”,Nirma University International Conference on Engineering (NUiCONE 2012), Nirma University Ahemdabad, Gujarat, Paper id: 188.
  5. V. K. Dwivedi, Sanjeev Kumar Gupta, DeeptiSoni, Pratibha Singh, Bhupendra Singh, 24 – 25 August 2012, “Effect of Eccentricity Ratio on Pressure Profile of Short Journal Bearing”, 1st International Conference on Innovative Technologies in Mechanical Engineering (ITME 2012), KIET Ghaziabad, U.P., Paper ID: ITME 201202, Page No. 225 – 229.
  6. Anish Kumar Singh, Jitendra Kumar Chauhan, Sanjeev Kumar Gupta, V. K. Dwivedi, 24 – 25 August 2012, “Design and CFD Analysis of Contraction Wall Profile of Open Circuit Blow Down Type Wind Tunnel”, 1st International Conference on Innovative Technologies in Mechanical Engineering (ITME 2012), KIET Ghaziabad, U.P., Paper ID: ITME 201204, Page No. 26 – 32.
    1. Kuldeep Singh, Sanjeev Kumar Gupta, Ajay Pratap Singh, 15 – 18 December 2011, “Active Flow Control using Vortex Generator Jet”, 26th Indian Engineering Congress, Institution of Engineers, Karnataka State Centre, Benguluru.
    2. Jitendra Dixit, Pankaj Tiwari, Sanjeev Kumar Gupta, Pratibha Singh, Harshit Gupta, 10 -12 November 2011, “Educated Unemployed: A New Challenge before Sustainable Education”, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number: 150 – 156, ISBN: 978 – 93 – 81583 – 10 – 4.
    3. Sanjeev Kumar Gupta, Vijay Kumar Dwivedi, DeeptiSoni, Bhupendra Singh, 10 -12 November 2011, “Major Thrust to begin the Work of  Indian Education for Sustainable Development of Society and Nation”, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number : 143 – 149, ISBN: 978 – 93 – 81583 – 10 – 4.

10. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, 10 -12 November 2011, “Modeling of Relative Specific Energy before and after the Hydraulic Jump in Horizontal Prismatic Channel”, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number: 343 – 350, ISBN: 978 – 93 – 81583 – 10 – 4.

11. Ajay Pratap Singh, AkshoyRanjan Paul, Sanjeev Kumar Gupta, Anuj Jain, 6 – 8 June 2011, “Experimental Analysis of Flow Separation Control over a Hump”, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), S. V. NIT Surat, Gujarat, Paper No: TF 10, Page Numbers: 318 – 322.

12. V. K. Dwivedi, Sanjeev Kumar Gupta, 6 – 8 June 2011, “Finite Difference Method Analysis of Hybrid Bearing”, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), S. V. NIT Surat, Gujarat, Paper No: DD 84, Page Numbers: 240 – 244.

13. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, AajayPratap Singh, 6 – 8 June 2011, “Modeling of Sequent Depth Ratio and Relative Height of the Hydraulic Jump in Horizontal Prismatic Channel”, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), S. V. NIT Surat, Gujarat, Paper No – TF 60, Page Numbers: 452 – 456.

14. Sanjeev Kumar Gupta, Vijay Kumar Dwivedi, Pratibha Singh, Harshit Gupta, 26 – 27 February 2011, “Present Scenario of Renewable Energy Resources and its Utilization in India”, International Conference on Recent Trends in Engineering, Technology & Management, BIET, Jhansi, Paper No. 118, Page Numbers 754 - 761, ISBN:  93 – 80697 – 69 – 4.

15. Sanjeev Kumar Gupta, Vijay Kumar Dwivedi, DeeptiSoni, Bhupendra Singh, 26 – 27 February 2011, “Paradigm Change in Indian Education for Sustainable Development of Society and Nation”, International Conference on Recent Trends in Engineering, Technology & Management, BIET, Jhansi, Paper No. 147,  Page Numbers  980 - 989 , ISBN. 93 – 80697 – 69 – 4.

16. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, Ajay Pratap Singh, 26 – 27 February 2011, “Modeling of Dissipation Index and Efficiency of Hydraulic Jump in Sloping Prismatic Channels”, International Conference on Recent Trends in Engineering, Technology & Management, BIET, Jhansi, Paper No. 14, Page Numbers 80 - 85, ISBN. 93 – 80697 – 69 – 4.

17. Sanjeev Kumar Gupta, R.C. Mehta, 27 – 29 December 2010, “Experimental Study of Hydraulic Jump Characteristics in Sloping Prismatic Channels”, 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2010), Department of Aerospace Engineering, IIT Kharagpur, Paper No- 0045, ISBN. 978-93-80813-03-05.

18. Sanjeev Kumar Gupta, R. C. Mehta, Vijay Kumar Dwivedi, 5 – 7 December  2010, “Modeling of Relative Length and Relative Energy Loss of Hydraulic Jump in Sloping Prismatic Channels for Environmental Hazards Control”, 2nd International Conference on Climate Change and Sustainable Management of Natural Resources, IASCA, ITM Universe Gwalior, Paper No – CP 77

National Conferences

  1. Vishal Yadav, Suprabh Dixit, Sanjeev Kumar Gupta, Vijay Kumar Dwivedi, 4 – 6 July 2013, “Computational Analysis of Flow behind a Wake of a Circular Cylinder, Indian Conference on Applied Mechanics (INCAM 2013), IIT Chennai, Madras, Paper ID: FM12, pp:224-225, ISBN:978-93-5137-273-8.
  2. UjjwalTandon, Shivam Jindal, Tarun Sharma, Sanjeev Kumar Gupta, V. K. Dwivedi,4 – 6 July 2013, “Computational Analysis of Flow Separation over Backward Facing Step, Indian Conference on Applied Mechanics (INCAM 2013), IIT Chennai, Madras, Paper ID: FM11, pp: 222-223ISBN:978-93-5137-273-8
  3. Sanjeev Kumar Gupta,Ajit Kumar Gupta, DheerajSagar, 20 – 22 October 2011, “Modeling of Relative Height of Hydraulic Jump in Horizontal Prismatic Channel using C Programming”, National Symposium on Instrumentation (NSI – 36), Focal Theme – Hydro – Meteorological Instrumentation, Jointly organized  by Invertis University Bareilly and Instrument Society of India, Department of Instrumentation, Indian Institute of Science Bangalore, Page Number – 44.
  4. Vijay Kumar Dwivedi, Sanjeev Kumar Gupta, Shyam Sunder Agrawal, 25 – 26 March 2011, “CFD Modeling of Flow Pattern of Rayleigh Step Bearing by Using Fluent 6.2”, National Conference on Recent Advances in Mechanical Engineering, BSA College of Engineering and Technology, Mathura, Page Number: 20 – 24, ISBN: 978 – 81 -906515 – 3 – 0.
  5. SumeghaAnand, Stuti Sharma, Sanjeev Kumar Gupta, Vijay Kumar Dwivedi, 25 – 26 March 2011, “A Critical Review of Environmental Impact and Climate Change due to Construction and Operation of Dam”, National Conference on Recent Advances in Mechanical Engineering, BSA College of Engineering and Technology, Mathura, Page Number: 234 – 238, ISBN: 978 – 81 -906515 – 3 – 0.
  6. DeeptiSoni, Bhupendra Singh, Sanjeev Kumar Gupta, Vijay Kumar Dwivedi,  25 – 26 March 2011, “An Option for Energy Security and Environmental Sustainability: Wind Energy”, National Conference on Recent Advances in Mechanical Engineering, BSA College of Engineering and Technology, Mathura, Page Number: 239 – 243, ISBN: 978 – 81 -906515 – 3 – 0.
    1. S.N Pandey, Sanjeev Kumar Gupta, AbhishekTomar and ArunKumar, 19 - 21 November 2010, “Post Combustion Carbon Capture Technology”, National Conference on Eco – friendly Manufacturing for Sustainable Development, GLA University Mathura, Paper No. 56.
    2. Ajay Pratap Singh, AkshoyRanjan Paul, PritanshuRanjan, Sanjeev Kumar Gupta, 19 - 21 November 2010, “Numerical Investigation of Flow Characteristics over Backward Facing Step for Different Inclination Angle”, National Conference on Eco – friendly Manufacturing for Sustainable Development, GLA University Mathura, Paper No. 30.
    3. Sanjeev Kumar Gupta, Vijay Kumar Dwivedi, AkanshaYadav, Anjli Sharma, 27 – 28 November 2010, “Geothermal Energy Resources in India: A Review”, National Conference on Advance in Mechanical Engineering, Mechanical Engineering Section University Polytechnic, Aligarh Muslim University, Page Number 263-2666, ISBN: 978-93-80697-33-8.

10. Sanjeev Kumar Gupta, R. C. Mehta, 9-10 July 2010, “Modeling of Hydraulic Jump Characteristics in Horizontal Prismatic Channels”, Golden Jubilee National Conference on Modeling and Simulation in Heat Transfer and Fluid Flow (MSHTFF), NIT Jamshedpur, Paper No- MSHTFF 03.

 

Admission Query 2017
Admission Query