Department of Mechanical Engineering

List of Publications

   GLA University, Mathura

Department of Mechanical Engineering

Details of Publications

 

July 2017 onwards

Journal

  • Shahabuddin, Dwivedi V.K., Study of Friction Stir Welding – A Review, International Journal of Latest Trends in Engineering and Technology, Vol. 9, Issue 4, pp – 27-37, 2018, ISSN – 2278-621X. (ICI)
  • Shahabuddin, Dwivedi V.K., Fabrication and Design of Fixture with a New Technique for Friction Stir Welding, International Journal of Engineering Technology Science and Research, Vol. 5, Issue 1, pp. 1540-1544, 2018, ISSN – 2394-3386. (Google Scholar)
  • Gupta N.K., Tiwari A.K., Ghosh S.K., Experimental Investigation of Thermal Performance of Mesh Wick Heat Pipe, Heat Transfer Research, Begell House, inc.publisher (Accepted) (SCI).
  • Sharma A., Dwivedi V.K., Replacement of Kevlar with Spider Silk in Body Armour, World Journal of Technology, Engineering and Research, 2018, Vol. 3, Issue I, pp- 44-52.
  • Saxena K.K., Suresh K.S., Kulkarni R.V., Krishna K.V.M., Pancholi V., Srivastava D., Hot deformation behavior of Zr-1Nb alloy in two phase region microstructure and mechanical properties, Journal of Alloy & Compound, 741 (2018) 281-292 .(SCI).
  • Singh P.K., Sharma K., Mechanical & Visco Elastic properties of In-Situ Amine Functionalized multiple layer graphene/ epoxy Nanocomposites, Current Nano Science, 14 (2), 2018,  Bentham Science Publishers, pp – 1-11.(SCI).
  • Gupta N.K., Tiwari A.K., Ghosh S.K., Heat Transfer Mechanism in Heat Pipe using Nanofluids - A Review, Experimental Thermal and Fluid Science, 90 (2018) 84-100, Elsevier, (SCI).

 

Conference (International)

  • Gupta N. K., Tiwari A. K., Ghosh S. K., Application of hybrid nanofluids in heat pipe – An experimental study (paper code: ICEE016), First interational Conference on Energy & Environment: Global Challenges  - ICEE-2018, 09-10 March, 2018, NIT, Calicut.
  • Gupta N. K., Agrawal S., Tiwari A. K., Ghosh S. K., Effects of CeO­2/H2O Nanofluid application on thermal performance of mesh wick heat pipe (paper code: ICEE036), First interational Conference on Energy & Environment: Global Challenges  - ICEE-2018, 09-10 March, 2018, NIT, Calicut.
  • Singh K., Singhal P., “An emperical investigation of smll manufacturers for operational reliability” 4th International Conference on Industrial Engineering (ICIE-2017), pp- 346-349, SVNIT, Surat, Dec. 21-23, 2017, ISBN: 978-93-86238-39-9, Publisher: Excellent Publishing House.
  • Srivastava S., Agrawal M.K., “5-S implementation to reduce the lead time via applying time and motion technique for identification of wastes: A case study of small scale pipe industry” 4th International Conference on Industrial Engineering (ICIE-2017), pp- 937-942, SVNIT, Surat, Dec. 21-23, 2017, ISBN: 978-93-86238-39-9, Publisher: Excellent Publishing House.
  • Kumar S., Jain T., Rawat M., “Implementation investigation of factors for enhancement in productivity with econoomic conclusions” 4th International Conference on Industrial Engineering (ICIE-2017), pp- 136-141, SVNIT, Surat, Dec. 21-23, 2017, ISBN: 978-93-86238-39-9, Publisher: Excellent Publishing House.
  • Soina P., Sharma K., “Tensile behaviour of hybrid polymer nano-composite reinforced by Al2­­O3 rod and spherical shape nano particles” 4th International Conference on Industrial Engineering (ICIE-2017), pp- 594-597, SVNIT, Surat, Dec. 21-23, 2017, ISBN: 978-93-86238-39-9, Publisher: Excellent Publishing House.
  • Kumari S., Kumar A., Yadav R.K., Vivekananda K., “Optimization of machine parameters using TOPSIS-based Taguchi approach for turning of AISI D2 Steel” 4th International Conference on Industrial Engineering (ICIE-2017), pp- 442-444, SVNIT, Surat, Dec. 21-23, 2017, ISBN: 978-93-86238-39-9, Publisher: Excellent Publishing House.
  • Sharma A., Dwivedi V.K., “Overview of non-conventional energy and current status of India in renewale energy” International Conference on smart technologies for greeen and sustainable future- 2017, pp- 32-37, MANIT, Bhopal Dec. 08-09, 2017.
  • Rathore P., “Technological evaluation of enhancing thermal energy storage in buildings using PCM” International Conference on smart technologies for greeen and sustainable future- 2017, pp- 38-46, MANIT, Bhopal Dec. 08-09, 2017.
  • Alam M., Jain T., “Charging and discharging of shell and spiral tube LHSS using paraffin wax as a PCM” International Conference on smart technologies for greeen and sustainable future- 2017, pp- 24-30, MANIT, Bhopal Dec. 08-09, 2017.
  • Mahmood Y., Rao G., Singh P., Chaudhary H., “Design modification for anti-choking mechanism in thresher machine” 3rd International & 18th National Conference on Machines & Mechanism, paper id.- 131, BARC, Mumbai, Dec. 13-15, 2017.
  • Kukreja N., Alam M., “Effects of divergent nozzle on pulse detonation engine performance” International Conference on emerging trends in engineering innovations & technology management, pp- 109-112, Vol. 2, ISBN- 9789386724311, NIT, Hamirpur, Dec. 16-18, 2017.
  • Alam M., “Computational investigation over helo deck of simplified frigate ship” International Conference on emerging trends in engineering innovations & technology management, pp- 118-122, Vol. 2, ISBN- 9789386724311, NIT, Hamirpur, Dec. 16-18, 2017.
  • Mausam K., Singh R.P., Sharma K., “Selection of suitable machining parameter of die sinking electric discharge machine (EDM) to optimize material removal rate (MRR) using grey relational analysis (GRA) for CNT reinforced 10-layred carbon fiber nano composite” International Conference on emerging trends in engineering innovations & technology management, pp- 190-195, Vol. 2, ISBN- 9789386724311, NIT, Hamirpur, Dec. 16-18, 2017.
  • Rathore B., Sonia P., “Noise control in tile cutting machine by Taguchi” International Conference on emerging trends in engineering innovations & technology management, pp- 196-199, Vol. 2, ISBN- 9789386724311, NIT, Hamirpur, Dec. 16-18, 2017.
  • Gupta S.K., Mehta R.C., “Experimental study of rapidly varied flow in horizontal prismatic channel: Relative pre-jump depth” International Conference on emerging trends in engineering innovations & technology management, pp- 252-255, Vol. 2, ISBN- 9789386724311, NIT, Hamirpur, Dec. 16-18, 2017.
  • Alam M., Jain T., “Charging and discharging of shell and spiral tube LHSS using paraffin wax as a PCM” International Conference on smart technologies for greeen and sustainable future- 2017, pp- 24-30, MANIT, Bhopal Dec. 08-09, 2017.
  • Jain T., Soni A., Rathore B.,  “Numerical study in channel angular pressing of friction with strain energy on aluminum alloy” International Conference on smart technologies for greeen and sustainable future- 2017, pp- 74-78, MANIT, Bhopal Dec. 08-09, 2017.
  • Kumar S., Rawat M., Jain T.,  “Energy saving by productivity improvement using alternate manufacturing techniques” International Conference on smart technologies for greeen and sustainable future- 2017, pp- 23-32, MANIT, Bhopal Dec. 08-09, 2017.
  • Saxena A., Awasthi A, Alam M.,  “Application of nanofluids in thermal energy storage system: A Review” International Conference on Nanotechnology: Ideas, Innovation & Initiatives - 2017, Paper Id- Div. Appl._371-ICN3I, IIT, Roorkee, Dec. 06-08, 2017.
  • Singh R.P., Tiwari A.K.,  “Recent devlopment in thermal conductivity of normal nanofluids and hybrid nanofluids: A Review” International Conference on Nanotechnology: Ideas, Innovation & Initiatives - 2017, Paper Id- Div. Appl._780-ICN3I, IIT, Roorkee, Dec. 06-08, 2017.
  • Mishra S., Gupta N.K.,  Tiwari A.K., Ghosh S.K., “A review of thermo-physical properties of nanofluids” International Conference on Nanotechnology: Ideas, Innovation & Initiatives - 2017, Paper Id- Div. Appl._321-ICN3I, IIT, Roorkee, Dec. 06-08, 2017.
  • Gupta N.K.,  Tiwari A.K., Ghosh S.K., “Effects of TiO2/H2O Nano fluid application on thermal performance of mesh wick heat pipe” International Conference on Nanotechnology: Ideas, Innovation & Initiatives - 2017, Paper Id- Div. Appl._319-ICN3I, IIT, Roorkee, Dec. 06-08, 2017.
  • Sharma H.K.,  Sharma A.K., Singh A., Singhal P., “Digital human modeling using CATIA-V5 for the analysis & ergonomic improvements in design of wearable load assisting device for porters” 15th International Ergonomics Conference on Humanizing Work  and Work Environment, Paper Id- HWWE-250, AMU, Aligarh, Dec. 08-10, 2017, Publisher- Excel India.
  • Kumar A.,  Singh P.K., Sharma K., Dwivedi V.K., “Evaluation of elastic moduli for different patterns of Stone-Thrower-Wales defect in Carbon Nanotubes/epoxy composites” Materials Today: Proceedings, Volume 4, Issue 9, pp. 9423-9428, 2017. International Conference on Recent Trends in Engineering and Material Sciences (ICEMS-2016), March 17-19, 2016, Jaipur, India(SCOPUS)
  • Kumar A., Sharma K., Singh P.K., Dwivedi V.K., “Mechanical characterization of vacancy defective single-walled carbon nanotube/epoxy composites, Materials Today: Proceedings, Volume 4, Issue 2, Part A, pp. 4013-4021, 2017. 5th International Conference of Materials Processing and Characterization (ICMPC 2016). (SCOPUS)
  • Pandey A., Sharma A., Singhal P., Ranjan R.K., Study of Mechanical Characeteristics of Sintered Preforms at Varying Strain rates During Slow Speed Forming Process, International Conference on Manufacturing Technology & Simulation, IIT, Madras, 07-08 July, 2017,  418-422, ISBN- 978-93-80689-26-5.

 

Conference (National)

  • Sharma R.K., Singhal P., Modeling of industrial supply networks to make them more effective by handling disruptions and uncertainities using MATLAB, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 11-18, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Chiroliya R., Gupta Y., Paswan A.K., Agrawal R., Sharma R.K., Singhal P., Thermo-physical characterization of Jatropha-based biodiesel, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 122-127, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Soni A., Sonia P., Synthesis and dynamic mechanical analysis of hybrid reinforced polymer nano-composites, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 47-52, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Sharma V., Mishra J.P., Multi-optimization of surface roughness & material removal rate of D3 tool steel while wet turning using multi criterion decision making methods, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 83-87, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Bhardwaj G., Sharma V., Sharma A., Correlations development of Nusselt number and friction factor of roughned double pass solar air heater duct, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 103-110, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Sharma A.K., Bhardwaj G., Singh B., Experimental investigation for optimization of process parameters of EDM for Titanium grade 5 alloy (T16AL4V) using Taguchi method, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 54-59, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Dixit P., Deshmukh T.S., CFD analysis of free surface flow over Broad-Crested Weir using volume of fluid method, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 97-102, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Singh B., Singhal P., Sharma A., Multiobjective optimizatino of submerged arc welding parameters on AISI 5130 alloy steel using Taguchi method, Conference on Mechanical Engineering & Technology, IIT, BHU, Varanasi, Mar. 31 – Apr. 01, 2018, pp – 77-82, Publisher – Blue Eyes Intellegence Engineering & Science Pubilcation Pvt. Ltd.
  • Pathak S., Singh L.P., Kukreja N., An Experimental Investigation on Waste Plastic Fuel Towards the Solution of Crude Oil Crisis, 25th National Conference on Internal Combustion Engines and Combustion, NIT Surathkal, India, Dec 15 -17, 2017, Paper ID: 25NCICEC075.
  • Nailwal R., Kukreja N., Comparision of Performance Characteristics of a Single Cylinder Four Stroke Diesel Engine using Diesel Kerosene – Diesel Blend, 25th National Conference on Internal Combustion Engines and Combustion, NIT Surathkal, India, Dec 15 -17, 2017, Paper ID: 25NCICEC077.
  • Alam M., Kukreja N., Singh A.K., Flow Characetristics over Helo Deck of a Simplified Frigate Ship (SFS) Model, Indian Conference on Applied Mechanics (INCAM), MNNIT, Allahabad, 05-07 July, 2017.
  • Kukreja N., Alam M., Dixit P.K., Computational Investigation of Rayleigh-Benard Convection in Viscoplastic Fluid, Indian Conference on Applied Mechanics (INCAM), MNNIT, Allahabad, 05-07 July, 2017.

 

July 2016 -  June 2017

Journal

  • Rathore P.K.S., Rathore S., Singh R.P., Agnihotri S., Solar power utility section in India: challenges and opportunities, Renewable and Sustainable Energy Reviews, 81(2) (2017) 2703-2713, Elsevier, (SCI). Impact Factor: 9.01.
  • Yadav A., Kumar A., Singh P.K., Sharma K., Glass transistion temperature of functionalized graphene epoxy composites using molecular dynamics simulation, Integrated Ferroelectric, Taylor & Francis,  2017, 184,  1-9. (SCI).
  • Bhardwaj G., Varun, Kumar R., Sharma A., Heat Transfer Augmentation and Flow Characteristics in Ribbed Triangular Duct Solar Air Heater: An experimental Analysis, International Journal of Green Energy, Taylor & Francis,  2017, 14 (7),  587-598. (SCI).
  • Kodli B.K., Karre R., Saxena K.K., Pancholi V., Dey S.R., Bhattacharjee A., Flow Behaviour of TiHy 600 Alloy under Hot Deformation using Gleeble 3800, Advances in Material and Processing Technologies, Taylor & Francis, (2017) 01-21, (SCI).
  • Saxena K. K., Pancholi V., Jha S. K., Chaudhari G. P., Srivastava D., Dey G. K., A Novel Approach to Understand the Deformation Behaviour in Two Phase Region using Processing Map, Journal of Alloy and Compound, 706 (2017) 511-519, Impact factor: 3.014 (SCI).
  • Saxena K. K., Jha S. K., Pancholi V., Chaudhari G. P., Srivastava D., Dey G. K., Saibaba N., Role of activation energies of individual phases in two phase range on constitutive equation of Zr-2.5Nb-0.5Cu, Transactions of Nonferrous Metals Society of China, 27 (2017) 172-183, Impact factor: 1.34 (SCI).
  • Verma S.K., Tiwari A.K., Chauhan D.S., Experimental Evaluation of Flat Plate Solar Collector using Nanofluid, Energy Conversion and Management, 134 (2017) 103-115, Elsevier, Impact factor: 4.380, 5-year Impact factor: 4.512. (SCI).
  • Verma S.K., Tiwari A.K., Chauhan D.S., Performance augmentation in flat plate solar collector using MgO/water nanofluid, Energy Conversion and Management, 124 (2016) 607-617, Elsevier Impact factor: 4.380, 5-year Impact factor: 4.512. (SCI).
  • Dwivedi V.K., Chand S., Pandey K.N., Stability Analysis of Twin Axial Groove Hybrid Journal Bearing, Journal of Applied Fluid Mechanics, Vol. 9, No.6, pp- 2763-2768, 2016, ISSN- 1735-3572. (SCI)
  • Kumar V, Tiwari A.K., Ghosh S.K., Effect of variable spacing on performance of plate heat exchanger using nanofluids, Energy, 114 (2016) 1107-1119, Publisher: Elsevier (SCI).
  • Singh P.K., Sharma K., Kumar A., Shukla M., Effects of functionalization on the mechanical properties of multiwalled carbon nanotubes: A molecular dynamics approach, Journal of Composite Materials, 2016, DOI: 10.1177/0021998316649781, Impact factor 1.242. (SCI)
  • Sharma S, Singh R.P. and Kumar S.,  Development of Nano-Structured Metals Processed by Severe Plastic Deformation, Indian Journal of Science and Technology, Vol 9 (27), July 2016.(Scoupus)
  • Sharma S., Singh R.P. and Kumar S., Bonding Characteristics of Al and Al-Alloy Strips: Processed by Severe Plastic Deformation, International Journal of Engineering & Technology, Vol. 8 No 5 Oct-Nov 2016, pp- 1893-1898.
  • Gupta S.K., Dwivedi V.K., Sachdeva S., Singh S., Investigation of coefficient of skin friction and axial velocity of fully developed turbulent flow through pipe, Science & Technology, The International Quarterly journal, 2016, 2(7), 312-318, ISSN 2394-3750.
  • Kaushik S., Singhal P., A Review on RAM (Reliability, Availability, and Maintainability) Analysis, its Applications and its Incorporation in the Modern World, International Journal of Engineering Research in Mechanical and Civil Engineering, Vol.1, Issue.3, July 2016, pp: 29-37, ISSN: 2456-1290.
  • Kumar B.K., Saxena K.K., Dey S.R., Pancholi V., Bhattacharjee A., Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600), Journal of Alloys and Compounds, 691, 15 January 2017, pp: 906-913. Elsevier, Impact factor 3.014. (SCI)
  • Chetan Raj Singh and Rudra Pratap Singh, Prediction of output parameters in wire electrical discharge machining of EN-31 steel by artificial neural networks, International Journal of Advanced Technology and Engineering Exploration, Vol 3(22), pp: 137-144, ISSN (Print): 2394-5443.
  • Sharma S., Singh R.P. and Kumar S, Mechanical Properties of Aluminum Sheets after Accumulative Roll Bonding Using Two and Four-High Rolling Mill, Global Journal of Advanced Engineering Technologies and Sciences, 4(2), Feb 2017, p: 08-13.

 

Conference (International)

  • Mausam K., Singh P.K., Sharma K., Gupta R.C., “Investigation of Process Parameter of EDM using Genetic Algorithm (GA) Approach for Carbon Fiber based Two Phase Epoxy composites”, Materials Today: Proceedings, Volume 3, Issue 10, Part B, pp. 4102-4108, 2016. International Conference on Materials Research and Applications ICMRA -2016 (11–13th March 2016), Department of Physics, CMR Technical Campus, Hyderabad, Telangana State, India
  • Kumari S., Uphadhyay A.K., Shukla K.K., Stress Analysis for an infinite plate with circular holes, 5th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 4 (2017) 2323-2332. (Scoupus)
  • Verma S.K., Tiwari A.K., Characterization of Nanofluids as an Advanced Heat Transporting Medium for Energy Systems, 5th International Conference on Materials Processing and Characterization (ICMPC 2016), Materials Today Proceedings, 4 (2017) 4095-4103. (Scoupus)
  • Kumar V., Tiwari A.K., Ghosh S.K., Characterization and Performance of Nanofluids in Plate Heat Exchanger, 5th International Conference on Materials Processing and Characterization (ICMPC 2016), Materials Today Proceedings, 4 (2017) 4070-4078. (Scoupus)
  • Yadav A., Kumar A., Shukla M.K., Sharma K., Investigating the Effects of Amine Functionalized Graphene on the Mechanical Properties of Epoxy Nanocomposites, 2nd International Conference on Emerging Materials: Characterization and Applications, NIT, Durgapur, pp: 114.
  • Shukla M.K., Kumar A., Yadav A., Sharma K., Improved Mechanical Properties of Graphene Oxide Reinforced Cross-linked Epoxy Nanocomposites: A Molecular Dynamics Approach, 2nd International Conference on Emerging Materials: Characterization and Applications, NIT, Durgapur (2017), pp: 113.
  • Mausam K, Singh R.P., Sharma K., Investigation of Optimum Process Parameter for Minimum Tool Wear in EDM Process, International Conference on Frontiers in Engineering, Applied Sciences & Technology, March 31- Apr. 01, 2017, pp: 115-119, ISBN: 978-81908388-8-7, NIT, Trichy.
  • Singh R.P., Mausam K., Selection of Optimum Honing Parameters for Surface Roughness Using Design of Experiment, International Conference on Frontiers in Engineering, Applied Sciences & Technology, March 31- Apr. 01, 2017, pp: 70-74, ISBN: 978-81908388-8-7, NIT, Trichy.
  • Rathore P.K.S., Srivastava S., Gupta N.K., Solar Energy in India: Key for Sustainable Development, International Conference on Frontiers in Engineering, Applied Sciences & Technology, March 31- Apr. 01, 2017, pp: 22-27, ISBN: 978-81908388-8-7, NIT, Trichy.
  • Gupta N.K., Tiwari A.K., Ghosh S.K., Progress in Application of Nanofluids in Heat Pipe- A Review, International Conference on Frontiers in Engineering, Applied Sciences & Technology, March 31- Apr. 01, 2017, pp: 16-21, ISBN: 978-81908388-8-7, NIT, Trichy.
  • Gupta N.K., Tiwari A.K., Ghosh S.K., Experimental Investigation of Thermal Efficiency of Thermosyphon Heat Pipe, International Conference on Frontiers in Engineering, Applied Sciences & Technology, March 31- Apr. 01, 2017, pp: 37-43, ISBN: 978-81908388-8-7, NIT, Trichy.
  • Gupta S.K., Singh S., Goyal S., Sachdeva S., CFD Analysis of Heat Transfer in a Square Duct, International Conference on Frontiers in Engineering, Applied Sciences & Technology, March 31- Apr. 01, 2017, pp: 221-225, ISBN: 978-81908388-8-7, NIT, Trichy.
  • Rai A., Dwivedi V. K., Effect of Temperature and Strain Rate of Glass Wool Composite Material with Mechanical Behaviour, International Conference on Design,  Material & Manufacturing Concern in Production of Quality Goods, March 27 -29, 2017, HBTU Kanpur, pp: 176-183.
  • Dubey S., Jain Y., Rajput A., Dwivedi V. K., Direct Evaporative Air Cooling: A Review, International Conference on Design,  Material & Manufacturing Concern in Production of Quality Goods, March 27 -29, 2017, HBTU Kanpur, pp: 516-519.
  • Kumar A, Kumar A., Garg A., Kumar M., Kumar N., Dwivedi V. K., Sonia, Comparative Study of Mechanical Properties for TIG and FSW Welding Process, International Conference on Design,  Material & Manufacturing Concern in Production of Quality Goods, March 27 -29, 2017, HBTU Kanpur, pp: 363-367.
  • Yadav A, Pathak P., Dwivedi V. K., Uncertainty in Supply Chain Management using Artificial Neural Network, International Conference on Design,  Material & Manufacturing Concern in Production of Quality Goods, March 27 -29, 2017, HBTU Kanpur, pp: 256-263.
  • Sharma A, Dwivedi V. K., Structure and Properties of Spider Silk as Super Material, International Conference on Design,  Material & Manufacturing Concern in Production of Quality Goods, March 27 -29, 2017, HBTU Kanpur, pp: 111-116.
  • Kumari S., Kumar A, Yadav R.K., Vivakanand K., Optimization of Machining Parameters using Grey Relation Analysis Integrated with Harmony Search for Turning of AISI D2 Steel, International Conference on Materials Manufacturing & Modelling,  VIT, Vellore, Mar. 09-11, 2017, Paper No. MPM489.
  • Gupta N.K., Rathore P.K.S., Sinha S., Biodiesel Production from waste cooking oil using ultrasonic cavitation and its characterization, IEEE International Conference on Advances in Mechanical, Industrial, Automation and Management Systems, (AMIAMS-2017), Feb. 03-05, 2017, Paper No. 15., MNNIT, Allahabad
  • Kumar V., Tiwari A.K., Ghosh S.K., Application of Nanofluids in Plate Heat Exchanger: An Experimental Investigation, 6th International Conference on Fluid Mechanics and Fluid Power, Dec. 15-17, 2016, MNNIT, Allahabad, Paper No. 9.
  • Gupta N. K., Sinha S, Biodiesel Production from Waste Cooking Oil and Its Characterization, IVth International Conference on Production and Industrial Engineering, CPIE-2016, Dr. B. R. Ambedkar National of Institute of Technology Jalandhar, 19-21 December, 2016, Paper no. 222.
  • Mausam K., Singh R.P., Sharma K., Annirudh, Development of Genetic Algorithm (GA) Model for optimization of Tool Wear Rate (TWR) for 6 Layered Carbon Fiber based Epoxy composites, IVthInternational Conference on Production and Industrial Engineering, CPIE-2016, Dr. B. R. Ambedkar National of Institute of Technology Jalandhar, 19-21 December, 2016, Paper no. 138.
  • Sharma H., Sonia P., Singhal P., Computer Assisted Industrial Ergonomics: A Review, International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems, IIT, Kharagpur, Dec. 20-23, 2016, Paper no. MESH-16/ED/042.
  • Goswami R., Singhal P., Sustainable Ergonomics Study: Different Causes of Musculoskeletal Disorders (MSDs) and their Prevention, International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems, IIT, Kharagpur, Dec. 20-23, 2016, Paper no. MESH-16/ED/010 .
  • Singh B., Singhal P., Ergonomic Design Analysis of Welding Workshop of Educational Institutions, International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems, IIT, Kharagpur, Dec. 20-23, 2016, Paper no. MESH-16/ED/009.
  • Sharma R., Singhal P., Dynamic Optimization of Health Care Supply Networks under Multi-disruptions using Model Predictive Controller, International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems, IIT, Kharagpur, Dec. 20-23, 2016, Paper no. MESH-16/HS/003.
  • Rai A., Pathak P., Dwivedi V.K., Green Supply Chain Management Using Fuzzy Set Theory Under Uncertainity, XXth Annual International Conference of The Society of Operations Management, ABV- Indian Institute of Information Technology and Management, Gwalior, Dec. 22-24, 2016, ISBN Number: 9781786354181, Paper no. 92.
  • Anand S., Singhal P., Chaudhary A.K., Sustainability Through Leasing: A Case Study of Indian Automobile Sector, XXth Annual International Conference of The Society of Operations Management, ABV- Indian Institute of Information Technology and Management Gwalior, Dec. 22-24, 2016, ISBN Number: 9781786354181, Paper No. 42.
  • Sharma R.K., Singhal P., An Expert System to Manage Multi Disruptions in Extended Supply Networks for Improving Supply Chain Performance using Neural Network and Model Predictive Controller Combination, XXth Annual International Conference of The Society of Operations Management, ABV- Indian Institute of Information Technology and Management Gwalior, Dec. 22-24, 2016, ISBN Number: 9781786354181, Paper no. 82.
  • Singh B., Singhal P., Work Related Musculoskeletal Disorders (WMSDs) Risk Assessment For Different Welding Positions And Processes, 14th International Conference on Humanizing Work and Work Environment HWWE-2016, NIT, Jalandhar Dec. 08-11, 2016, pp: 264-267, ISBN Number: 978-93-83006-81-6.
  • Sharma H.K., Singhal P, and Goswami R., Review of Literature on Methods for Identification of Basic Ergonomic Considerations that Affect Employees in Workplace Environment, 14th International Conference on Humanizing Work and Work Environment HWWE-2016, NIT, Jalandhar Dec. 08-11, 2016, pp: 458-463, ISBN Number: 978-93-83006-81-6.
  • Goswami R., Singhal P., and Sharma H.K., Application of 10 Ergonomics Checkpoints for Improving Working Conditions and Productivity in Agriculture Sector of India, 14th International Conference on Humanizing Work and Work Environment HWWE-2016, NIT, Jalandhar Dec. 08-11, 2016, pp: 418-423, ISBN Number: 978-93-83006-81-6.
  • Saxena K. K., Pancholi V., Chaudhari G. P., Srivastava D., Dey G. K., Jha S. K., Saibaba N., Hot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb Alloy, 5th International Conference on Material Science and Engineering Technology, during 29-31 Oct. 2016, University of Tokyo, Japan, Trans Tech publication, Materials Science Forum (ISSN print 0255-5476/ISSN web 1662-9752, Elsevier. (SCOPUS)

 

 

Conference (National)

  • Saxena K.K., Chetan K., Jha S.K., Krishna K.V., Pancholi V., Srivastava D., Analysis of Constitutive Equation Using FEM Simulation of Zr-1Nb, National Conference on Physical Simulation of Thermo-Mechanical Processing of Materials (NC-PSTMPM), IIT Bombay, June 15-17, 2017. (SCOPUS)
  • Pancholi V., Saxena K.K., Jha S.K., Choudhary G.P., Srivastava D, Day G.K., Hot Deformation studies of Zr Alloy to Understand Deformation Behaviour in Two Phase Region, National Conference on Physical Simulation of Thermo-Mechanical Processing of Materials (NC-PSTMPM), June 15-17, 2017.
  • Jain T., Kumar S., Rawat M., Implementation Analysis of Parameters for Improvement in Productivity with Monetary Outcomes, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 276-282, ISBN: 978-93-86256-88-1.
  • Rawat M., Kumar S., Jain T., Assessment of the Effect of Triangular Velocity Profile Over an Elliptical Cylinder, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 221-224, ISBN: 978-93-86256-88-1.
  • Gautam D.K., Yadav S.K., Robot Path Optimization in Cellular Manufacturing Environment, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 150-153, ISBN: 978-93-86256-88-1.
  • Yadav S.K., Gautam D.K., Optimizing Machining Parameters of EN 31 Steel Using Electric Discharge Machining, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 154-157, ISBN: 978-93-86256-88-1.
  • Kumar A., Upadhyay V.V., FE Analysis of a Connecting Rod of a LCV using CAE Tools, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 190-194, ISBN: 978-93-86256-88-1.
  • Kukreja N., Alam M., Nirankari D., Sharma K., Numerically Camparing Simple and Shchelkin Spirals Type of Tubes of a Pulse Detonation Engine, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 85-89, ISBN: 978-93-86256-88-1.
  • Upadhyay V.V., Kumar A., Sharma V., Identification of Most Important and Easy to Implement Key Components of Vendor Managed Inventory (VMI) in Automobile Industry, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 119-122, ISBN: 978-93-86256-88-1.
  • Nirankari D., Chaitanya N.V.V.K., Alam M., Numerical Investigation on Biplane Structure at Different Mach Numbers, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 128-132, ISBN: 978-93-86256-88-1.
  • Alam M., Kukreja N., Singh A.K., Experimental and Numerical Investigation Over Helo Deck of a Simplified Frigate Ship (SFS), National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 96-100, ISBN: 978-93-86256-88-1.
  • Mehra N.S., Jain T., Sharma V., Redundancy Resolution of Serial Link Manipulators in Joint Space: A Numerical Approach using Inverse Kinematics, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 106-111, ISBN: 978-93-86256-88-1.
  • Gupta S.K., Mehta R.C., Empirical Formulation of Jump Characteristics in Horizontal Channel, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 25-27, ISBN: 978-93-86256-88-1.
  • Srivastava S., Dixit P., Agrawal M., A Quick Change-Over Time using SMED Techniques: Setup Reduction of Hot Rolled Slitter (HRS) and Cold Rolled Slitter (CRS) in Indian Conditions, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 145-149, ISBN: 978-93-86256-88-1.
  • Soni A., Jain T., Rathore B., Numerical Study of Frictional Effect in Equal Channel Angular Pressing on Aluminum Alloy, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 55-59, ISBN: 978-93-86256-88-1.
  • Rathore B., Sonia P., Soni A., Optimization of Noise Control in Tile Cutting Machine, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 66-69, ISBN: 978-93-86256-88-1.
  • Kumar A., Awasthi M., Kukreja N., Effect of Feed Rates on Residual Stress Generation and their Estimation during Micro Milling, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), NIT, Kurukshetra, pp- 18-20, ISBN: 978-93-86256-88-1.
  • Sharma V., Bhardwaj G., Upadhyay V.V., Parametric Optimization of Surface Roughness of D3 Tool Steel while Turning using Taguchi Method, 3rd AMPD 2017, 10-11 Mar., 2017,  NIT, Surat, pp: 137-143.
  • Sonia P., Singh P.K., Sharma K., Tensile Behaviour of Hybrid Polymer Nanocomposite Reinforced by Al2O3 Rod and Spherical Shape Nano Particles, AMP 2017, 06-10 Mar., 2017,  NIT, Durgapur, paper No: 44.
  • Singh P.K., Sonia P., Sharma K., Investigation of Mechanical Characteristics of Amine Functionalized Graphene using Molecular Dynamics Simulation, AMP 2017, 06-10 Mar., 2017,  NIT, Durgapur, paper No: 45.
  • Singh P.K., Singh P.K., Effect of Initial Microstructure on Overall Properties of Electroactive Polymer Nano-Composite, AMP 2017, 06-10 Mar., 2017,  NIT, Durgapur, paper No: 42.
  • Dwivedi V.K., Analysis of groove dimensions and orientation effect on the characteristic performance parameters and stability of axial grooved journal bearings, National Tribology Conference 2016, 08-10 Dec., 2016, IIT, BHU, Varanasi, pp: 43-44.
  • Rathore P.K.S., Rathore S.S., Solar Power Profile of India: On the Path of Sustainable Development, National Conference on Energy, Economy and Environment, NIT Calicut, Dec. 16-17, 2016, pp: 168-171.

 

July 2015- June 2016

Journal

  • Sharma P., Sonia P., Sharma K., Mausam K., Dynamic Mechanical Properties of Epoxy Composite Reinforced with Alumina Nanorods, Advanced Science Letters, Publisher: American Scientific Publishers. Vol. 21, 2833–2835, 2015. (Scoupus)
  • Sharma K., Kaushalyayan K.S., Effect of Amino Functionalized Carbon Nanotubes on Thermal Mechanical Properties of Multi-Walled Carbon Nanotube/Epoxy Composite, Advanced Science Letters, Publisher: American Scientific Publishers. Vol. 21, 2790–2793, 2015. (Scoupus)
  • Kumar V., Tiwari A.K., Ghosh S.K., Application of nanofluids in plate heat exchanger: a review, Energy Conversion and Management, 105 (2015) 1017–1036, Publisher: Elsevier, Impact factor: 4.380, 5-year Impact factor: 4.512. (SCI).
  • Verma S.K.,Tiwari A.K., Progress of Nanofluid Application in Solar Collectors: A Review, Energy Conversion and Management, 100 (2015) 324–346, Publisher: Elsevier, Impact factor: 4.380, 5-year Impact factor: 4.512. (SCI).
  • Kumar V., Tiwari A.K., Ghosh S.K., Effect of chevron angle on heat transfer performance in plate heat exchanger using ZnO/water nanofluid, Energy Conversion and Management, 118 (2016) 142–154 (SCI).
  • Sharma A.K., Tiwari A.K., Dixit A.R., Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A review, Journal of Cleaner Production 127 (2016) 1-18, Publisher: Elsevier, Impact factor: 3.844, 5-year Impact factor: 4.167. (SCI)
  • Sharma A.K., Tiwari A.K., Dixit A.R., Rheological Behaviour of Nanofluids: A Review, Renewable & Sustainable Energy Reviews, 53 (2016) 779–791, Publisher: Elsevier, Impact factor: 5.901, 5-year Impact factor: 7.445. (SCI).
  • Vashistha C., Patil A. K., Kumar M., Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts, Applied Thermal Engineering, 96 (2016) 117–129. (SCI)
  • Sharma A., Bharadwaj G., Varun, Heat Transfer and Friction Factor Correlation Development for Double Pass Solar Air Heater Having V-Shaped Ribs as Roughness Elements, Experimental Heat Transfer, A Journal of Thermal Energy Generation, Transport,  Storage, and Conversion, ISSN 1543 - 5075, 2016, Volume 30 (1), pp. 70-90. (SCI).
  • Sharma S.,  Singh R.P., Kumar S., Mechanical Anisotropy of Aluminium AA1050 and Aluminium Alloy AA6016 produced by Accumulative Roll Bonding, International Journal of Innovation in Engineering and Technology, Vol. 7(1) (2016), pp 350-356.
  • Gupta S.K., Dwivedi V.K., Dissipation index and efficiency of free hydraulic jump in horizontal prismatic channel: an experimental approach, Discovery Engineering, An International Journal, 2016, 4(12), 245-251.
  • Kumari S., Pardeep, Fuzzy Rule Based Optimization in Machining of Inconel 718, Journal of Material Science and Mechanical Engineering (JMSME), p-ISSN: 2393-9095; e-ISSN: 2393-9109, Volume 3, Issue 3; April-June, 2016 pp. 231-234.
  • Singh J., Suman K.S., Kumari S., Bending behavior of Orthotropic Skew Plate subjected to Point Load, March 2016, IJIRT, Volume 2 Issue 10, ISSN: 2349-6002.
  • Mandal G.K., Rajinikanth V., Kumar S., Mishra D., Misra S., Srivastava V.C., Ghosh Chowdhury S.,  Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel, Transaction Indian Institution of  Metals, DOI 10.1007/s12666-016-0895-7, 2016. (Scoupus)
  • Tyagi S., Dwivedi V.K., Sharma K., Evaluation of mechanical properties of single-walled carbon nanotube/HDPE-P5300 composites using molecular dynamics, Advanced Material Manufacturing & Characterization, Vol. 6, Issue 1, 2016.
  • Agrawal M.K., Kumar S., Lean Project Implementation and Complexity Involved, An International Journal of Innovative Research in Science, Engineering and Technology, ISSN (Online):2319-8753, ISSN (Print): 2347-6710, Vol.4, Issue 8, August 2015, pp.7521-7535.
  • Kumari P., Singh R.P., Abrasive Wear Mathematical Model of140MXC Nano Structured Hardfacing,  International Journal of Innovative Research in Science, Engineering and Technology, August, 2015 Volume 4 Issue 8. pp. 7321-7330.
  • Kumari P., Singh R.P., Development of Mathematical Models for Prediction of Weld Bead Geometry of Hardfaced Steel, International Journal of Applied Engineering Research. Number 17 (2015), Volume 10, pp 38509-38525.
  • K. K. Saxena, S. Sonkar, V. Pancholi, G. P. Chaudhari, D. Srivastava, G. K. Dey, S. K. Jha, N. Saibaba, Hot Deformation Behavior of Zr-2.5Nb Alloy: A Comparative Study Using Different Materials Models, Journal of Alloys and Compounds, 662, 2016 pp. 94-101, Elsevier, Dec. 2015. (SCI)
  • Agrawal M.K., Kumar S., Change Management in a Lean Manufacturing Environment, An International Journal of Engineering and Advanced Technology (IJEAT), ISSN 2249-8958, Vol.4, Issue 8, August 2015, pp.7521-7535.
  • Nagar S., Kumar S., High speed forging of a polygonal disc with die surface excitation, An International Journal of Manufacturing Technology & Research, ISSN 0973-0281, Vol.11, Issue 1&2, Jan-Dec. 2015, pp.17-24.
  • Verma S.K., Tiwari A.K., Application of Nanoparticles in Solar collectors: A Review: International Journal of Advance Research in Science and Engineering, Vol- 4, Special Issue 2, 2015, ISSN – 2319-8354.
  • Dwivedi V.K., Pathak P., Performance of Supply Chain in an Uncertain Environment using Fuzzy Logic, International Journal on Design & Manufacturing Technologies, Vol.9 No.2 July 2015.
  • Saxena K.K., Pancholi V., Srivastav D., Dey G. K., Jha S.K., Saibaba N., Determination of Instability in Zr-2.5Nb-0.5Cu Using Lyapunov Function, Materials Science Forum Vols. 830-831 (2015) pp 329-332, Trans Tech Publications, Switzerland, Sept. 2015. (Scoupus)

 

Conference (International)

  • Sharma A.K., Tiwari A.K., Dixit A.R., Characterization of TiO2, Al2O3 and SiO2 Nanoparticle based Cutting Fluids: Materials Today: Proceedings (Publisher: Elsevier) 2016. (Scoupus)
  • Sharma A.K., Singh R. K., Dixit A.R., Tiwari A.K., Characterization and experimental investigation of Al2O3­ nanoparticle based cutting fluid in turning of AISI 1040 steel under minimum quality lubrication: Materials Today: Proceedings (Publisher: Elsevier) 2016. (Scoupus)
  • Sharma A.K., Tiwari A.K., Singh R. K., Dixit A.R., Tribological investigation of TiO2 nanoparticle based cutting fluid in machining under minimum quantity lubrication (MQL), Materials Today: Proceedings (Publisher: Elsevier) 2016. (Scoupus)
  • Kumari P., Singh R.P., Optimization of welding parameter for weld dilution in GMAW using Genetic Algorithm, V International Symposium on Fusion of Science & Technology, Jan 18-22, 2016, ISBN;978-93-84935-64-1.
  • Goswami R., Singhal P., Shrivastav V.K., Commercialization of nanotechnology in last decade in India: A review, International Conference on Nanotechnology for Better Living, 2016-Proceedings, Vol. 03, No. 03, p: 371.
  • Bajaj R., Tiwari A.K., Dixit A.R., Current trends in electric discharge machining using micro and nano powder materials- A Review:4th International conference on Material process and characterization, GRIET Hyderabad, India, 14th -15th March 2015, Materials Today: (Publisher: Elsevier). (Scoupus)
  • Verma S.K., Tiwari A.K., Performance Analysis of Flat-Plate Solar Collector using MgO/Water Nanofluids :International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama University, India, July 8th-10th,Materials Today: Proceedings (Publisher: Elsevier). (Scoupus)
  • Verma S.K., Tiwari A.K., Application of nanoparticles in solar collector: a review: 4th International conference on Material Processing and Characterization, Material Today,2 (2015), 3638-3647. (Scoupus)
  • Mausam K., Singh P.K., Sharma K., Gupta R.C., Investigate the optimum process parameter of a high speed EDM using a gray relational analysis for multi-scale carbon fiber nano composite, International Conference on Recent Advances in Nano Science and Technology -2015, Material Today Proceeding. (Scoupus)
  • Kumar A., Sharma K., Singh P.K., Ashraf J., Effect of different vacancy patterns on mechanical properties of single – walled carbon nanotubes using molecular dynamics,  International conference on Computational Condensed Matter Physics and Material Science, (IWCCMP 2015), 18-22 October 2015.
  • Chahar A.S., Dwivedi V.K., Computational Investigation of Pressure Drift in Pipes of Shell and Tube Heat Exchanger, International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments – March, 2014, (ICRAMID – 2014) Ponjesly College of Engineering, Nagercoil, pp. 77 – 81.

 

Conference (National)

  • Singh C.R., Singh R.P., Bansal G., Optimization of Wire Electrical Discharge Machining Process of EN-31 for Surface Roughness and Material Removal Rate Using Artificial Neural Networks, National Conference on Recent Advances in Science and Engineering (RASE 2016), March 28th - 29th, 2016, ISM, Dhanbad.
  • Rana D.S., Singh R.P., Process parameter optimization in electric discharge machining of EN31 die steel using Artificial Neural Network (ANN), National Conference on Process Automation & Control, NCPAC - 2016.
  • Baghel C.B., Singhal P., Mishra R., Developing a Set-Based Transportation Model, in Supply Chain Management. Innovative Concepts In Mechanical Engineering Ajay Kumar Garg Engineering College, Ghaziabad, ISSN 0975-9514, pp- 32-36, 2016.
  • Kumar.V., Tiwari A.K., Ghosh S.K., Heat transfer augmentation in plate heat exchanger using nanofluid: 17th Indian Society of Mechanical Engineers (ISME) Conference on Advances in Mechanical Engineering, IIT Delhi, India, October 3rd-4th, 2015.

 

July 2014- June 2015

Journal

  • Sharma K., Kaushalyayan K.S., Shukla M., Pull-out Simulations of Interfacial Properties of Amine Functionalized Multi-walled Carbon Nanotube Epoxy Composites, Computational Materials Science, 99 (2015) 232-241, Impact factor 2.086. (SCI).
  • Tiwari A.K., Ghosh P., Sarkar J., Particle concentration levels of various nanofluids in plate heat exchanger for best performance, International Journal of Heat and Mass Transfer 89 (2015) 1110–1118, Publisher: Elsevier Science Impact factor: 2.383, 5-year Impact factor: 2.809. (SCI).
  • Sharma A.K., Tiwari A.K., Dixit A.R., Progress of nanofluids application in machining: A review, Materials and Manufacturing Processes, 30(2015) 813–828 Publisher: Taylor & Francis ,Impact factor: 1.629. (SCI),
  • Payal S., Tiwari M., Sharma K., Design and analysis of a process plant piping system,  International Journal of Current Engineering and Technology,  ISSN 2277 – 4106, 2014, pp: 31 – 39 .
  • Kumar V., Tiwari A.K., Ghosh S.K., Implementation of Nanofluid in Plate Heat Exchanger: A Reivew, International Journal of Advance Research in Science and Engineering, Vol. 4, Issue 2, 2015.
  • Agrawal M.K., Kumar S., Waste Minimization: A Tool For Lean Implementation, An International Journal of Mechanical Engineering Research, ISSN 2249-0019, Vol.5, No.1, pp. 55-72, Research India Publications. 2015
  • Tiwari A.K., Thermal Performance of Shell and Tube Heat Exchanger using Nano Fluids, International journal of advances in production and mechanical engineering (IJAPME), ISSN(print):2394-6202, (online):2394-6210,volume-1,issue-1,2015

 

 

Conference (International)

  • Dwivedi V.K., Chand S., Pandey K.N., Effect of the groove dimensions and orientation on the static and dynamic performance of non recessed hybrid journal bearing, Proceeding of 23rd International Conference on systems engineering, Advances in Intelligent systems and computing,  Las Vegas, USA, Aug. 19 – 21, 2014, Vol. 1089, Page No. 555-561, ISBN- 978-3-319-08421-3.
  • Kodli B.K., Saxena K.K., Dey S.R., Pancholi V., Bhattacharjee A, Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000° C with different strain rates, 17th International Conference on Textures of Materials (ICOTOM 17), Materials Science and Engineering, 82 (1), 2015, pp. 12032. (Scoupus)
  • Saxena K.K., Yadav S.D., Kumar R., Pancholi V., Chaudhari G.P., Srivastava D., Dey G.K., Jha S.K., Saibaba N., Effect of Temperature and Strain Rate on Deformation Behavior of Zirconium Alloy: Zr-2.5Nb, 3rd International Conference on Materials Processing and Characterisation (ICMPC 2014), Procedia Materials Science, 6, 2014, pp 188–193. (Scoupus)
  • Sharma A.K., Tiwari A.K., Dixit A.R., Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique- A Review: 4th International conference on Material process and characterization, GRIET Hyderabad, India, 14th -15th March 2014, Materials Today: Proceedings (Publisher: Elsevier). (Scoupus)
  • Sharma A.K., Tiwari A.K., Dixit A.R., Mechanism of Nanoparticles functioning and Effects in Machining Processes: A Review: 4th International conference on Material process and characterization, GRIET Hyderabad, India, 14th -15th March 2014, Materials Today: Proceedings (Publisher: Elsevier). (Scoupus)
  • Tiwari M., Mausam K., Sharma K., Singh R.P., Investigate the Optimal Combination of Process Parameters by Using a Grey Relational Analysis. Procedia Engineering 2014 vol5, pp1736-1744. (Scoupus)
  • Sharma R., Singhal P., An Optimal Treatment of Supply Chain Disruptions using Model Predictive Control, December 12-14, 2014, XVIII Annual International Conference of the Society of Operations Management (SOM 2014), IIT, Roorkee, Page No. 103-109, ISBN 978-93-84935-023.
  • Sharma R., Pathak D.K., Dwivedi V.K., Modeling & Simulation of Spring Mass Damper System in Simulink Environment, XVIII Annual International Conference of the Society of Operations Management (SOM 2014), IIT, Roorkee, Page No. 205-209, ISBN 978-93-84935-023.
  • Sharma R., Singhal P., Robust Handling of Supply Chain Disruptions using Model Predictive Control, Review of Business & technology (RBTR) ISSN 1941-9414, Volume 11, Number 1, December 2014, Published by Department of Mechanical Engineering, under Technical Education Quality Improvement Programme-II (TEQIP-II) National Institute of Technology, Hamirpur (H.P.) INDIA (An institute of National Importance, MHRD, Government of India).
  • Tiwari M., Mausam K., Sharma K., Process Parameter Optimization of a High Speed Electro-Discharge Machining using a Taguchi Fuzzy-Based Approach, International Conference on Mechanical Engineering: Emerging Trends for Sustainability, 29-31 January, 2014 organized by Maulana Azad National Institute of Technology, Bhopal.
  • Baghel V., Singhal P., Applying Lean Manufacturing in Construction and Performance using LPS, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 740-745, ISSN 1941-9414.
  • Sharma P., Tiwari M., Kumar D., Dwivedi V.K., Pathak D.K., A Case Study of CAEPIPE Base Design and Stress Analysis of Process Plant Piping System, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 696-702, ISSN 1941-9414.
  • Kumar D., Tiwari M., Dwivedi V.K., Pathak D.K., A Genetic Algorithm Approach for Optimizing the Combination of Process Parameters for EDM of Carbon Fiber Epoxy Composites, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014,), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 79-87, ISSN 1941-9414.
  • Kaushalyayan K.S., Tiwari M., Kumar D., Sharma K., Dwivedi V.K., Pathak D.K., Investigation of Process Parameters for EDM of Carbon Fiber Epoxy Composites using TOPSIS, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 163-169, ISSN 1941-9414.
  • Baghel V., Dwivedi V.K., Pathak D.K., Comparative Study of Stress Analysis of a Plate with Three Hole, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 388-392, ISSN 1941-9414.
  • Agrawal P.K., Dwivedi V.K., Pathak D.K., Comparative Study of Stress Analysis of a Plate with Hole at Centre, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 268-273, ISSN 1941-9414.
  • Nagar S., Pathak D.K., Dwivedi V.K., An Automated Optimal Location of a Warehouse using MATLAB, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 331-337, ISSN 1941-9414.
  • Agrawal P.K., Tiwari A.K., Verma S., Improvement of efficiency of flat-plate solar collector using nanofluids in a solar water heater system: 4th International conference on emerging paradigms and practices in global technology, National Institute of Technology (NIT), Hamirpur, India, 22th -24th December 2014.
  • Kumar D.,  Tiwari A.K., Verma S.,  Thermal analysis using nanofluid in a shell & tube heat exchanger–a review: 4th International conference on emerging paradigms and practices in global technology, National Institute of Technology (NIT), Hamirpur, India, 22th -24th December 2014.
  • Sharma R., Pathak D.K., Dwivedi V.K., Modelling & Simulation of Spring Mass Damper System in Simulink Environment, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 434-440, ISSN 1941-9414.
  • Tiwari A.K., Enhancement of heat transfer by using nanofluids in a heat exchanger, 2nd International conference on Recent Development in Mechanical, Production, Industrial and Automobile Engineering (ICMPIAE 2015).
  • Verma S.K., Tiwari A.K., Application of nanofluids in direct absorbing solar collector: A Review, International conference on Science, Technology and Management, YMCA, New Delhi (India), 1 Feb 2015.
  • Nagar S., Kumar S., Kumar A., Analysis of dynamic effects during forging of a polygonal disc under vibrating conditions, 4th International Conference on Material Processing & Characterization, Material Today, 2 (2015), 2104-2114. (Scoupus)
  • Mausam K., Sharma K., Gupta R.C., Taliwal M., Investigation of optimum parameter ofelectro-discharge machining for two phase carbon fiber composites using taguchi method, Tronida India, ISSN(PRINT):2394-6202,(ONLINE):2394-6210,VOLUME-1,ISSUE-1,2015
  • Dwivedi V.K., Chand S.and Pandey K.N., August 19-21, 2014, Effect of the groove dimensions and orientation on the static and dynamic performance of non recessed hybrid journal bearing,  Proceeding of the twenty-third international conference on System Engineering, advances in Intelligent System and computing, Las Vegas USA Vol. 1089, Page no. 555-561 ISBN 978-3-319-08421-3.

                                                                                                              

Conference (National)

  • Agrawal M.K., Dev V., Lean Manufacturing Practices: Conceptual Framework and Implementation, National Conference on Achieving Excellence for Industrial Competitiveness (AEIC) held on 19-20 Jan.2014 and organized by GLAU, Mathura.
  • Agrawal M.K., Dev V., JIT Manufacturing System: Some Requirement for Implementation and Pay Off, all India Seminar on: Recent Advances in Manufacturing and its Management (RAMM-2014) held on 7-8 Feb.2014 and organized by The Institution of Engineers (India) in association with BIT, Sindri, Dhanbad (Jharkhand).
  • Zaidi M.A., Javed M.N., Kumari S., Kumar A., Simulation study of stiffeners on composite plate at  National conference on Sustainable Innovation through Management, Engineering, Science and Technology (SIMEST 2013) at Rajshree Institute of Management & Technology,  Bareilly.
  • Agrawal M.K., Srivastava S., Application of Value Stream maps for Identification & Elimination of Wastes in Process Industry in Indian Conditions, UGC-SAP National Seminar on: Ergonomics, Biomechanics and Occupational Health (EBOH-2015) held on 14 March, 2015 and organized by Department of Mechanical Engineering, Faculty of Engineering, Dayalbagh Educational Institute, Dayalbagh, Agra (U.P.).
  • Janve P.S., Javed M.N., Kumari S., Bhardwaj A., Vibrational behaviour of Stiffened Functionally Graded Plate, Proceedings of 58th Congress of ISTAM, BESU Shibpur; Howrah, W.B. 2015.

 

July 2013- June 2014

Journal

  • Tiwari A.K., Ghosh P., Sarkar J.Dahiya H., Parekh J., Numerical investigation of heat transfer and fluid flow in plate heat exchanger using nanofluids, International Journal of Thermal Sciences, 85 (2014) 93-103,Publisher:Elsevier. Impact factor: 2.629,5-year Impact factor: 3.156 (ranked 2th on the science direct top 25 most downloaded papers of the journal). (SCI)
  • Tiwari A.K., Ghosh P., Sarkar J., Combined energy and exergy analysis of a corrugated plate heat exchanger and experimental investigation, International Journal of Exergy, Vol. 15, No. 4, 395-411, 2014, Publisher:Inderscience. Impact factor: 0.847.(SCI).
  • Bhardwaj G., Kaushal M., Varun, Heat transfer and friction characteristics of equilateral triangular solar air heater duct using inclined continuous ribs as roughness element on the absorber plate, International Journal of Sustainable Energy (Taylor and Francis), 2013, Volume 32 (6) pp-515-530. (Scoupus)
  • Agrawal M.K., Implementation of Lean Manufacturing in a Moderate Industry, An International Journal of Manufacturing Technology and Research, Vol.10, No.2, July-December, 2014, New Delhi (ISSN :0973-0281)
  • Dwivedi V.K., Chand S., Pandey K.N., Effects of Turbulence on Dynamic Performance of Accelerated/ Decelerated Hydrodynamic Journal Bearing System, International Journal of Design Engineering, 5(3) (2014) 256-288. (Scoupus)
  • Jindal S., Sharma T.K., Tandan U., Dwivedi V.K., Design and CFD analysis of constraction wall profile of open circuit suction type wind tunnel, Technology Letters, 1(4) (2014) 9-13.
  • Chahar A.S., Dwivedi V.K., Computational Investigation of Shell Liquid of Shell and Tube Heat Exchanger Permitting the Consequence of Rod Baffles Temperament on Liquefied Drift, Technology Letters, 1(11) (2014) 22-26.
  • Singh B., Soni D., Dwivedi V.K., A Comparative Study of Static and Dynamic Characteristics of Wave Bearings and Cylindrical Journal Bearings, Technology Letters, 1(11) (2014) 17-21.
  • Dwivedi V.K., Chand S., Pandey K.N., Effects of Reynolds Number on Linear and Non- Linear Journal Trajectory at Constant Speed of Non Recessed Hybrid Journal Bearing, International Journal of Pure & Applied Research in Engineering & Technology, 1 No.8 (2013) 1-8.
  • Dwivedi V.K., Chand S., Pandey K.N., Effect of Geometry of Lobes and L/D Ratio on the Static Performance of 2-Lobe Hybrid Journal Bearing, International Journal of Pure & Applied Research in Engineering & Technology, 1 No.8 (2013) 64-71.Upadhyay V.V., Tewari P. C., Gupta A., Evaluation of Vendor Managed Inventory Elements in Manufacturing Sector Using ANOVA Technique, The IUP Journal of Supply Chain Management, July 2013, Vol. X, No. 2, June 2013, pp. 54-72.
  • Singh R.P., Maurya S.K., Process parameter optimization for minimum tool wear in EDM process, International Journal of Manufacturing Technology and Research, Jul – Dec. 2013, Vol. 9, No.2, Page No. 05 – 08, ISSN: 0973 – 0281.
  • Kumar B., Singh R.K., Kumar S., Tiwari S.K., Design for variety in the initial stages of product development, International Journal of Manufacturing Technology and Research, Jul – Dec. 2013, Vol. 9, No.2, Page No. 16 – 22, ISSN: 0973 – 0281.
  • Ratna S., Ghosh J., Application of ANN during machining of EN 24 steel for flank wear prediction, International Journal of Manufacturing Technology and Research, Jul – Dec. 2013, Vol. 9, No.2, Page No. 23 – 26, ISSN: 0973 – 0281.
  • Chatterjee R., Sharma V., Kumar S., Environmental impact analysis of biodiesel production by life cycle assessment and eco-efficiency, International Journal of Manufacturing Technology and Research, Jul – Dec. 2013, Vol. 9, No.2, Page No. 31 – 37, ISSN: 0973 – 0281.
  • Sharma V.K., Kumar S., Hydrodynamic action due to presence of non-Newtonian flow zone, International Journal of Manufacturing Technology and Research, Jul – Dec. 2013, Vol. 9, No.2, Page No. 45 – 52, ISSN: 0973 – 0281.
  • Sharma, K., Shukla M., Three-Phase Carbon Fiber Amine Functionalized, Carbon Nanotubes Epoxy Composite: Processing, Characterization, and Multiscale Modeling,  Journal of Nanomaterials, 2014, pp. 1-10, Impact Factor – 1.758. (SCI)
  • Sharma, K., Shukla M., Molecular modeling of mechanical behavior of carbon fiber/amine functionalized multiwalled carbon nanotubes/epoxy composites, New Carbon Materials 2014 vol 29 (2), pp132-142. , Impact Factor – 0.98. (SCI)
  • Mausam K., Tiwari M., Sharma K., Singh R.P., Process Parameter Optimization for Maximum Material Removal Rate in High Speed Electro-Discharge Machining, International Journal of Current Engineering in Technology, pp- 239-244, 2014, ISSN – 2277-4106.
  • Nanda V.N. & Kumar S., Implementation and Cybernetic Control of Legrile Manufacturing Paradigm, IJRMET Vol. 4, Issue 2, Spl- 2 May - October 2014, ISSN: 2249-5762 (Online).
  • Tiwari M., Mausam K., Sharma K., Singh R.P., Experimental Analysis of Electro-Discharge Machining Parameters for Minimum Tool Wear Rate on Machinability of Carbon Fiber/Epoxy Composites Using Taguchi Method, International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 2 Issue 10, 2013 pp. 3182-3188.

 

 

Conference (International)

  • Chahar A.S., Dwivedi V.K., Computational Analysis of Thermal Cracks on gasket of shell and tube heat exchanger, International conference on Mechanical Engineering, Emerging Trends for Sustainability – 29-31 January, 2014, (IC MEETS – 2014) MANIT, Bhopal, pp. 1011 – 1018.
  • Dwivedi V.K., Chand S., Pandey K.N., Study of lubricant supply arrangement in non recessed hybrid journal bearing, 25th International conference on design theory and methodology, Portlant, Oregon, USA, pp V005T11A040, Aug. 04-07, 2013, paper no. DETC2013-12872.
  • Rathore P.K.S., Rathore S.S., Performance analysis of 2-stroke compressed ignition engine by using compressed air, International conference on recent advances in Mechanical Engineering and interdisciplinary development, pp 143-147, Mar. 07-08, 2014, Nagarcoil Engineering College, Tamilnadu, India.
  • Rathore P.K.S., Tripath R.N., Performance analysis of 2-stroke gasoline engine by using compressed air, International conference on industrial engineering science & applications, April 02-04, 2014, NIT, Durgapur, India.
  • A.K. Tiwari, Kumar V., Ghosh P., Sarkar J., Energetic and exergetic performances of Al2O3/water nanofluid in plate heat exchanger: Proceedings of the 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.
  • Dwivedi V.K., Chand S., Pandey K.N., Study of the lubricant supply arrangement in non recessed hybrid journal bearing, ASME conference IDETC/CIE 2013, proceeding of ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering, 5, pp. V005T11A040; 5 pages.
  • Chahar A.S., Dwivedi V.K., Computational Analysis of Shell Fluid of Shell and Tube Heat Exchanger Allowing the Outcome of Baffles Disposition on Fluid Flow, International Conference on Industrial Engineering Science and Applications – 2014 (IESA-2014), 2 – 4 April, 2014, NIT, Durgapur, paper no. – 10.
  • Shukla D.K., Sonia P., Verma V., Characterization of Fracture Properties of Epoxy-Alumina Polymer Nanocomposite, Applied Mechanics and Materials Vol. 390 (2013) pp 557-561.
  • Goswami R., Dwivedi V.K., Singhal S., Design, Simulation and Validation of an Subsonic (open circuit blow type) Wind Tunnel using Computational Fluid Dynamics (CFD) Technique, International Conference on Mechanical Engineering: Emerging Trends for Sustainability – 2014, 29 – 31 January, 2014, (IC MEETS – 2014) MANIT, Bhopal, pp. 862 – 871.
  • Goswami R., Singhal S., Dwivedi V.K., Design and Simulation of a Low Speed Wind Tunnel with Analysis of Wind Effects on an Airfoil (Virtually) using CFD, International Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT, Kanpur, Paper Code: FMFP14-C-659.
  • Saxena R. and Singh B., Effect of Incorporating Latent Heat in Arc Welding Simulation. International Mechanical Engineering Congress – 2014 (IMEC 2014) 13-15 June 2104 NIT Tiruchirappalli, Tamilnadu India pp. 111-114 .

 

Conference (National)

  • Tandan U., Jindal S., Sharma T.K., Gupta S.K., Dwivedi V.K., Computational Analysis of Flow Separation over Backward Facing Step, Indian Conference on Mechanics (INCAM – 2013),  04 – 06 July, 2013, IIT, Madras.
  • Yadav V., Dixit S., Gupta S.K., Dwivedi V.K., Computational Analysis of Turbulent Wake Flow behind a Circular Cylinder, Indian Conference on Mechanics (INCAM – 2013), 04 – 06 July, 2013,  IIT, Madras.
  • Sharma R.K., Nagar S., Agrawal P., An Introduction To Lean Manufacturing, (National Conference On Sustainable Business, Organized By IIPE Chapter University Polytechnic Mathura & Research Promotion Cell, University Polytechnic, GLA University Mathura), 25-26 October 2013, held at GLA University Mathura.
  • Sharma R.K., Agrawal P., Life Cycle Management Issues, National Conference On Global Competitiveness through Quick Response Manufacturing (Organized by Indian Institution Of Production Engineers & Research Promotion Cell, University Polytechnic, GLA University Mathura),18-20 April 2014, held at GLA University Mathura.

July 2012- June 2013

Journal

  • Rathore P.K.S., Singh M.P., Agnihotri S., Performance analysis of 4-stroke diesel engine by using mahua methyl ester (biodiesel) and its blends with diesel fuel, International Journal of Systems, Algorithms & Applications, Vol. 3 (2012), pp. 111-114.
  • Dwivedi V.K., Chand S., Pandey K.N., Analysis of hybrid (hydrodynamic / hydrostatic), journal bearing, Advanced Materials Research, Vol. 650 (2013), pp. 385-390, Trans Tech Publications, Switzerland.
  • Dwivedi V.K., Chand S., Pandey K.N., Selection of fluid film journal bearing: A fuzzy approach, International Journal of Advances in Computer Science, Engg & Appl., Springer, pp. 311-320.
  • Tiwari A.K., Ghosh P., Sarkar J., Performance comparison of the plate heat exchanger using different nanofluids, Experimental Thermal and Fluid Science, 49 (2013) 141-151 Publisher: Elsevier (SCI). Impact factor: 1.990, 5-year Impact factor: 2.180 (Consecutive three times ranked 5th, 8th and 17th on the sciencedirect top 25 most downloaded papers of the journal).
  • Tiwari A.K., Ghosh P., Sarkar J., Heat transfer and pressure drop characteristics of CeO2/water nano fluid in plate heat exchanger, Applied Thermal Engineering, 57 (2013) 24 - 32 Publisher: Elsevier (SCI). Impact factor: 3.043, 5-year Impact factor: 3.269.
  • Tiwari A.K., Ghosh P., Sarkar J., Solar water heating using nanofluids- a comprehensive overview and environmental impact analysis, International Journal of Emerging Technology and Advanced Engineering, 3(3), 221-224, 2013.
  • Verma S.K., Daniel B.S.S., Synthesis and Characterization of shape memory alloy, Cu74Zn22Al4 (wt%) using high energy ball milling, American International Journal of Research in Science, Technology,  Engineering and Mathematics pp-11-22, 2013.
  • Soni A., Patel R.K., Two dimensional Finite Element Modeling of Single Pulse Laser Drilling, International Journal of Engineering, Science and Innovative Technology, 2013, vol.2, ISSN: 2319-5967, 3_IJESIT201303_56.
  • Singh R.P.,  Gupta R.C., Sarkar S.C., Application of ANN to Analyze and Predict Impact Strength and hardness of Shielded Metal Arc Welded Joints under the Influence of External Magnetic Field, International Journal of Pure and Applied Research in Engineering and Technology, February, 2013. Volume 1, Issue 6, pp. 26-36.
  • Singh R.P., Gupta R.C., Sarkar S.C., Analysis of Depth of Penetration and Bead Width of Shielded Metal Arc Weld under Magnetic Field Applying Artificial Neural Networks, International Journal of Science, Engineering and Technology Research, February, 2013. Volume 2, Issue 2, pp. 235-242.
  • Dogra S., Chauhan N. and Bhardwaj G., Effect of artificial roughness on heat transfer and Friction factor characteristics in rectangular duct of a double pass solar air heater, International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976-6359, 2012, Volume 4 (3), pp. 289-298.
  • Pathak P., Dwivedi V.K., Fuzzy based pricing model for old age insurance, International Journal for Fuzzy Logic Systems, 3 (1) (2013) 47-54.
  • Rawat M.K., Gupta R., Sarviya R.M., High Reynolds number flow over cylinder: A review, International Journal of Application or Innovation in Engineering & Management, Volume 2, Issue 6 (2013), pp. 160-170.
  • Singh R.P.,  Gupta R.C., Sarkar S.C., Application of Artificial Neural Network to Analyze and Predict the Mechanical Properties of Shielded Metal Arc Welded Joints under the Influence of External Magnetic Field,  International Journal of Engineering Research & Technology, October, 2012, Vol. 1, Issue 8, pp. 1-12.
  • Sharma A., Varun, Bhardwaj G., Effect of artificial roughness on heat transfer and friction characteristics of double pass solar air heater, International Journal of Mechanical and Industrial Engineering (IJMIE), 2012, ISSN No. 2231-6477, Volume 2 (3) pp-55-60.
  • Bhardwaj G., Varun, Sharma A., Thermohydraulic performance of an equilateral triangular duct with artificial roughness used in solar air heater, International Journal of Mechanical and Industrial Engineering (IJMIE), 2012, ISSN No. 2231-6477, Volume 2 (3) pp-50-55.
  • Sharma A., Varun, Dhiman P., Bhardwaj G., Heat transfer and friction characteristics of double pass solar air heater having V-shaped roughness on the absorber plate, International Journal of Sustainable and Renewable Energy, American Institute of Physics, (2013) Volume 5 (2). DOI: 10.1063/1.4794747.
  • Mausam K., Sharma K., Molecular dynamics simulation study of novel properties of defect full single walled carbon nanotubes. IJAIEM, 2013, 2 (2), 77-81.
  • Singh R.P., Gupta R.C., Chandra S., Sarkar S.C., Application of Artificial Neural Network for Prediction of Hardness of Shielded Metal Arc Welded Joints under the Influence of External Magnetic Field, International Journal of Engineering Research and Development, January, 2013, Volume 5, Issue 7, PP. 84-88.
  • Singh R.P.  Gupta R.C. Sarkar S.C., Application of Artificial Neural Network to Analyze and Predict the Tensile Strength of Shielded Metal Arc Welded Joints under the Influence of External Magnetic Field, International Journal of Engineering and Science, January 2013, Vol. 2, Issue 1, pp.53-57.
  • Singh R.P., Gupta R.C., Sarkar S.C, Application of Artificial Neural Network to Analyze and Predict the Toughness of Shielded Metal Arc Welded Joints  under the Influence of External Magnetic Field, International Journal of  Innovative Research & Development, January, 2013, Volume 2, Issue. 1, pp. 191-200.
  • Singh R.P., Gupta R.C., Sarkar S.C., Analysis of Bead Width and Reinforcement Height during Shielded Metal Arc Welding under Magnetic Field using Artificial Neural Networks,  International Journal of Mechanical Engineering and Robotics Research, April, 2013, Volume 2, Issue 2., pp. 1-10.
  • Rawat M.K., Gupta R., Sarviya R.M., Numerical simulation of flow around an elliptical cylinder at high Reynolds numbers, International Journal of Fluid Engineering, Volume 5, Number 1 (2013), pp. 29-37.
  • Singh R.P.,  Gupta R.C., Sarkar S.C., Prediction of Weld Bead Geometry in Shielded Metal Arc Welding under External Magnetic Field using Artificial Neural Networks, International Journal of Manufacturing Technology and Research, 2012, Vol. 8, number 1, pp. 9-15.
  • Singh R.P.,  Gupta R.C., Sarkar S.C., Sharma K.G., Rathore P.K.S., Application of ANN to Predict Reinforcement Height of Weld Bead under Magnetic Field,  International Journal of Emerging Trends & Technology in Computer Science, November–December, 2012. Volume 1, Issue 4.  pp. 70-74.
  • Singh R.P.,  Gupta R.C., Sarkar S.C., The Effect of Process Parameters on Penetration in Shielded Metal Arc Welding under Magnetic Field using Artificial Neural Networks,  International Journal of Application or Innovation in Engineering & Management, December 2012, Volume 1, Issue 4. pp. 12-17.

 

Conference (International)

  • Agrawal M.K., Kumar S., Lean Manufacturing Philosophy: - “An Approach to improve production efficiency and customer responsiveness”, 26th Proceeding of 1st International Conference on Innovative Technologies in Mechanical Engineering 17th &18th August 2012, Page No. 87-97, Krishna Institute of Engineering & Technology, Ghaziabad.
  • Gupta S.K., Dwivedi V.K., Chauhan J.K., Singh A. & Goswami R., 09 – 12 December 2012, Design and Simulation of Open Circuit Blow Down Type Wind Tunnel, Fourth International Congress on Computational Mechanics and Simulation (ICCMS 2012), IIT Hyderabad, A.P., Paper ID: 115.
  • Singh A.K., Chauhan J.K., Gupta S.K., Dwivedi V.K., Design and CFD Analysis of Contraction Wall Profile of Open Circuit Blow Down Type Wind Tunnel, Ist International conference on Innovative Technologies in Mechanical Engineering, 17-18 August 2012, KIET Ghaziabad, U.P. India, pp 26-32.
  • Singh A.K., Chauhan J.K., Gupta S.K., Dwivedi V.K., Design of CFD Analysis of Contraction Wall Profile of Open Circuit Blow Down Type Wind Tunnel Ist International conference on Innovative Technologies in Mechanical Engineering, 17-18 August 2012, KIET Ghaziabad, U.P. India, pp 26-32.
  • Dwivedi V.K., Gupta S.K., Soni D., Soni P., Singh B., Effect of eccentricity ratio on pressure profile of short journal bearing Ist International conference on Innovative Technologies in Mechanical Engineering, 17-18 August 2012, KIET Ghaziabad, U.P. India, pp 225-230.
  • Sharma K., Shukla M., Molecular dynamics simulation of the effect of amine functionalization on the elastic properties of single, double & triple walled carbon nanotubes, Eighth South African Conference on Computational and Applied Mechanics (SACAM-2012), Johannesburg, South Africa.
  • Dwivedi V.K., Chand S., Pandey K.N., Effect of Number and Size of Recess on the Performance of Hybrid (Hydrostatic/Hydrodynamic) Journal Bearing, Proceedia Engineering, Elsevier, 51 (2013), 810-817. (Scoupus)
  • Gupta S.K., Mehta R. C., Dwivedi V.K., Modeling of Relative Length and Relative Energy Loss of Free Hydraulic Jump in Horizontal Prismatic Channel, 25 April 2013, Procedia Engineering, Elsevier, Vol/Issue: 51C, pp: 529–537, ISSN: 1877- 7058. (Scoupus)

 

Conference (National)

  • Bhardwaj G. and Varun, Effect of artificial roughness on heat transfer and friction characteristics of equilateral triangular duct, Proceeding of 1st National conference on Thermal, Fluid and Manufacturing science, ISBN-978-81-8487-202-6, pp-178-183, 2012.
  • Dwivedi V.K., Sharma D., Pathak P., Decision for Gate Limiter of a Hydro Power Plant Based on Fuzzy Logic, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 142.
  • Dwivedi V.K., Tiwari M., Pathak P., Implementing Fuzzy Logic for Prediction of Power Generation of Small Scale Vertical Axis Wind Turbine, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 143.
  • Dwivedi V.K., Chahar A.S., Pathak P., Modeling of Shell and Tube Heat Exchanger for Fuzzy Proportional Derivative (FDP) control, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 144.
  • Mausam K., Sharma K., Study of Mechanical Properties of Carbon Nanotubes with Synthesis and Production Methods - A Review, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 153.
  • Kumari S., Javed M.N., Selecting optimal parametric combination in machining of AlSiC during EDM, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 172.
  • Singh R.P., Maurya, S.K., Process Parameter Optimization for Minimum Tool Wear in EDM Process, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 177.
  • Gupta N.K., Sinha S., Experimental Investigation of Biodiesel Production Techniques, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 174.
  • Gupta N.K., Sinha S., Optimization of Biodiesel production using TAGUCHI Technique, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 178.
  • Nanda V.N., Improving Industrial Competitiveness through Cleaner Production, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 184.

 

July 2011- June 2012

Journal

  • Kumar B., Kumar S., The impacts of product modularity to support green life-cycle engineering, International Journal of Manufacturing Technology and Research, July – Dec 2011, Vol. 7, No.2, Page No. 25 – 31, ISSN: 0973 – 0281.
  • Singhal P., Agrawal G., Mittal M.L., Modeling of risk management strategies for SMEs Using ANN under various levels of operational risks, Advance Material Research, Transtech publication, 2012, vol: 433-440, pp: 1683-1691. (Scoupus)
  • Tiwari A.K., Ghosh P., Sarkar J., Investigation of thermal conductivity and viscosity of nanofluids, Journal of Environmental Research and Development, 7(2), 768-777, 2012. Impact factor: 1.613
  • Agrawal M.K., Manufacturing Flexibility and On Time Delivery Performance, An International Journal of Manufacturing Technology and Research, Vol.8, No.2, July-December, 2012, New Delhi.
  • Gupta S.K., Mehta R.C., Dwivedi V.K., Singh A.P., Modeling of Sequent Depth Ratio and Relative Height of  the Hydraulic Jump in Horizontal Prismatic Channels, International Journal of Advances in Thermal Science and Engineering, Serial Publication, New Delhi, January – June 2011, Vol. 2, No.1, Page No. 73 – 78.
  • Saxena K.K., Srivastva V., Sharma K., Calculation of fundamental Mechanical Properties of Single-walled Carbon Nanotube Using Non-local elastic, Computational Materials Science, 2012, Vol- 99, pp.232-241.( SCI)
  • Sharma K., Shukla M., Experimental study of Mechanical properties of Multiscale Carbon-fiber-epoxy-CNT-composites, Advanced Materials Research, Vol. – 383-390 (2012), pp – 2723-2727. (Scoupus)

 

Conference (International)

  • Singh K., Gupta S.K., Singh A.P., Active Flow Control using Vortex Generator Jet, 26th Indian Engineering Congress, 15 – 18 December 2011, Institution of Engineers, Karnataka State Centre, Benguluru.
  • Gupta S.K., Dwivedi V.K., Soni D., Singh B., Major Thrust to begin the Work of  Indian Education for Sustainable Development of Society and Nation, 10 -12 November 2011, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number : 143 – 149, ISBN: 978 – 93 – 81583 – 10 – 4.
  • Gupta S.K., Mehta R.C., Dwivedi V.K., Modeling of Relative Specific Energy before and after the Hydraulic Jump in Horizontal Prismatic Channel, 10 -12 November 2011, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number: 343 – 350, ISBN: 978 – 93 – 81583 – 10 – 4.
  • Dixit J., Tiwari P., Gupta S.K., Singh P., Gupta H., Educated Unemployed: A New Challenge before Sustainable Education, International Conference on Sustainable Manufacturing: Issue, 10 -12 November 2011, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number: 150 – 156, ISBN: 978 – 93 – 81583 – 10 – 4.
  • Sharma K., Shukla M., Saxena K., Experimental Study of Mechanical Properties of Multi-scale Carbon fiber-Epoxy-CNT composites, International Conference on Manufacturing science and Technology, 16-18 Sep, Singapore.
  • Saxena K.K., Srivastava V., Sharma K., Calculation of fundamental Mechanical Properties of Single-walled Carbon Nanotube Using Non-local elastic, International Conference on Manufacturing science and Technology, 16-18 Sep, Singapore.
  • Singhal P., Agarwal G., Mittal M.L., Relationship of supply chain risks and drivers for SMEs: A combined approach with regression analysis and ANN, International Conference on Advances in Supply Chain and Manufacturing Management (ASCMM 2011), 16-18 December, IIT Kharagpur, India
  • Singhal P., Agarwal G., Mittal, M.L., Analysis of Risk Management Strategic Stances: A Unified Approach with Logistic regression and ANN, International Conference on Industrial Engineering. Organized by Deptt. of Mechanical Engineering, N.I.T. Surat. India, Association with Indian Institute of Industrial Engineering (IIIE), NHQ Mumbai, India. 17-19 November, 2011
  • Singhal P., Agarwal G., Mittal M.L., Risks Assessment of Lower Tier Suppliers Using Operational Reliabilities and Product Availabilities, The IEEE International Conference on Industrial Engineering and Engineering Management (IEEM-2011). 6-9 December 2011, Singapore, pp.226-230, Proceedings included in IEEE xplore and indexed by INSPEC and Ei Compendex, Digital Object Identifier: 10.1109/IEEM.2011.6117912   citation 1.
  • Sharma K., Saxena K., Shukla M., Effect of number of Stone-Wales and vacancy defects on the mechanical behavior of carbon nanotube using molecular dynamics, Procedia Engineering 2012, 38, 3373-3380. (Scoupus)
  • Tiwari A.K., Ghosh P., Sarkar J., Performance analysis of a  flat plate solar collectors using Al2O3/water  nanofluid in:  An International Conference on Energy Security, Global Warming and Sustainable Climate, Banaras Hindu University (BHU), Varanasi, India, February 07-09, 2012.
  • Varun, Sunil, Naveen, Sharma A., Construction and performance analysis of an indirect solar dryer integrated with solar air heater, International Conference on Modelling, Optimization and Computing-2012, Procedia Engineering 38 (2012) 3260 – 3269. (Scoupus)

 

Conference (National)

  • Sharma S., Gauri R., Gupta S.K., Dwivedi V.K., Electronics Industries in India: Challenges and Opportunities for Industrial Competitiveness, National Conference on Competitive Manufacturing: Strategic and Decision Support System, GLA University Mathura, 05 -06 Nov. 2011, Paper ID: 22.
  • Gupta S.K., Dwivedi V.K., Soni D., Singh B., Modeling of Seqquent Depth Ratio of Hydraulic Jump in Horizontal Prismatic Channel using C Programming, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: DS 05, pp: 119 – 122.
  • Soni D., Arya S., Gupta S.K., Dwivedi V.K., Small Hydro Power Potential and its Utilization in India and Climate Change, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: TR 07, pp: 113 – 118.
  • Singh P., Gupta H., Gupta S.K., Dwivedi V.K., Conventional and non-conventional energy resources of India: present and future, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: TR 06, pp: 70 – 76.
  • Sharma S., Gauri R., Gupta S.K., Dwivedi V.K., Renewable hydrogen production: an alternate approach towards sustainable development, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: TR 11, pp: 163 – 167.
  • Agrawal M.K., Manufacturing Flexibility: Competitiveness and on Time Delivery Performance, proceeding of National Conference on Competitive Manufacturing: Strategic and Decision Support System, held on 5-6 Nov., 2011 organized by GLA University, Mathura.
  • Srivastava S., Mausam K. and Agarwal M., Application of VSM for Identification of Mudas: A case study for small scale steel Industry in Indian Context, National Conference: Recent Advances in Mechanical Engineering held on 24-26th July 2012 and organized by International Science Congress Association, Indore.
  • Agrawal M.K., Kumar S., Robotization of Forge Industries to Sustain in the Competitive Environment, proceeding of National Conference Recent Advances in Mechanical Engineering (RAME-2012) held on 8-9th June, 2012 organised by Hindustan College of Science & Technology, Farah, Mathura.
  • Singh R.P., Gupta R.C., Rathore P.K.S., ANN Assisted Prediction of Weld Bead Geometry in Shielded Metal Arc Welding under External Magnetic Field. National Conference on Recent Advances in Mechanical Engineering (RAME-2012), HGST, Mathura, 8-9, June-2012. pp. 103-108
  • Nanda V.N., Sustainable Competitive Manufacturing: Present Status and Future Potential, National Conference on Competitive Manufacturing: Strategies & Decision Support Systems, November 05-06, 2011, paper id. 46.
  • Singhal P., Agarwal G., Mittal M.L., Investigation Of Decisional Aspects Of Supplier Selection Strategies For Smes Considering Supply Failure Risks And Supply Redundancies,  National Conference on Competitive Manufacturing: Strategies & Decision Support Systems, November 05-06, 2011, paper id. 42.

 

July 2010- June 2011

Journal

  • Chaterjee R., Sharma V., Kumar S., Resource utilization and environment impact of biodiesel produced from jatropha curcas, International Journal of Manufacturing Technology and Research, Jan – June 2011, Vol. 7, No.1, Page No. 81 – 91, ISSN: 0973 – 0281.
  • Sanadhya M., Singhal P., Gupta R.C., Environment friendly fuel for small compression ignition engine: Mahua biodiesel, International Journal of Manufacturing Technology and Research, Jan – June 2011, Vol. 7, No.1, Page No. 42 – 49, ISSN: 0973 – 0281.
  • Jha A.K., Kumar S., Eco-compatibility assessment in clean production environment of futuristic foundry and forge industry, International Journal of Manufacturing Technology and Research, Jan – June 2011, Vol. 7, No.1, Page No. 26 – 35, ISSN: 0973 – 0281.
  • Agrawal R., Kumar S., Design issues for automatic guided vehicles in material handling operations, International Journal of Manufacturing Technology and Research, July – Dec 2010, Vol. 6, No.2, Page No. 55 – 60, ISSN: 0973 – 0281.
  • Singhal P., Agrawal G., Mittal M.L., Modeling of Supply Risks with ANN: SME Perspectives, International Journal of Recent Trends in Engineering & Technology, March 2011, Vol. 5, No. 4.
  • Singhal P., Agrawal G., Mittal M.L., Supply chain risk management: review, classification and future research directions, International Journal of Business Science and Applied Management, March 2011, Vol. 6, Issue.3, pp:16-34. (Scoupus)
  • Gupta S.K., Mehta R.C., Dwivedi V.K., Modeling of Hydraulic Jump Characteristics in Sloping Prismatic Channels for Design and Manufacturing of Stilling Basin, International Journal of Manufacturing Technology and Research, July – Dec 2010, Vol. 6, No.2, Page No. 37 – 41, ISSN: 0973 – 0281.
  • Gupta S.K., Mehta R.C., Dwivedi V.K.,  Modeling of Relative height of  the Hydraulic Jump in Horizontal Prismatic Channels Using C Programming, Journal of the Instrument Society of India, Vol. 41(4), PP- 248-250, Dec-2011 (Published from Department of Instrumentation, IISC Bangalore) ISSN 0970-9983.

 

Conference (International)

  • Gupta S.K., Mehta R.C., Dwivedi V.K., Modeling of Relative Length and Relative Energy Loss of Hydraulic Jump in Sloping Prismatic Channels for Environmental Hazards Control, 2nd International Conference on Climate Change and Sustainable Management of Natural Resources, IASCA, 5– 7 December 2010, ITM Universe Gwalior, Paper No – CP 77
  • Gupta S.K., Mehta R.C., Experimental Study of Hydraulic Jump Characteristics in Sloping Prismatic Channels, 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2010), Department of Aerospace Engineering, 27 – 29 December 2010, IIT Kharagpur, Paper No- 0045, ISBN. 978-93-80813-03-05.
  • Reddy D.M., Sharma K., Shukla M., Effect of Amine functionalized Multi-walled Carbon Nanotubes on the mechanical properties of Carbon Fiber/Epoxy composites. International Conference on Synthesis, Characterization, Consolidation and modeling of nano materials: PSG Coimbatore, INDIA, March 05-06, 2010, pp-222-227.
  • Sharma K., Shukla M., Reddy D.M., Fabrication, Characterization and modeling of Amine Functionalized carbon nanotubes Carbon/fiber epoxy composites. International Conference on NANO-Technology- Materials and composites for Frontier Applications. Bhartiya Vidyapeeth University, Pune-India, October 14-15, 2010, pp53-54.
  • Sharma K., Shukla M., Micro-mechanics modeling and experimental study of Mechanical properties of Multiscale Carbon-fiber-epoxy-CNT-composites. International conference on Applied Mechanics and Materials Conference: Chicago, Illinois, May30-June 01 2011 (ASME-2011).
  • Sharma K., Shukla M., Molecular dynamics evaluation of mechanical properties of carbon nanotubes with number of Stone-Wales defects. International conference on Nano Science, Engineering and Technology (ICONSET 2011), 28-30 November 2011 IEEE Explore. pp 305-310.
  • Sharma K., Shukla M., Saxena K., Molecular Dynamics study of Mechanical Properties of Carbon-Nanotube reinforced LY556 composites. International conference on Nano-science and Technology, 14-16 October 2011, Singapore (Conference proceedings will be published by ASME, and paper will be included in ASME digital library, and Indexed by EI compendex, Thomson ISI proceedings). pp470-474.
  • Sharma K., Shukla M., Saxena K., Calculation of Elastic properties of PMMA/CNT using molecular Dynamics Study, International conference on Nano-science and Technology, 14-16 October 2011, Singapore (Conference proceedings will be published by ASME and paper will be included in ASME digital library, and indexed by EI compendex, Thomson ISI proceedings). pp 475-480.
  • Gupta S.K., Mehta R.C., Dwivedi V.K., Singh A.P., Modeling of Dissipation Index and Efficiency of Hydraulic Jump in Sloping Prismatic Channels, International Conference on Recent Trends in Engineering, Technology & Management, 26 – 27 February 2011, BIET, Jhansi, Paper No. 14, Page Numbers 80 - 85, ISBN. 93 – 80697 – 69 – 4.
  • Gupta S.K., Dwivedi V.K., Soni D., Singh B., Paradigm Change in Indian Education for Sustainable Development of Society and Nation, International Conference on Recent Trends in Engineering, Technology & Management, 26 – 27 February 2011, BIET, Jhansi, Paper No. 147,  Page Numbers  980 - 989, ISBN. 93 – 80697 – 69 – 4.
  • Gupta S.K., Dwivedi V.K., Singh P., Gupta H., Present Scenario of Renewable Energy Resources and its Utilization in India, International Conference on Recent Trends in Engineering, Technology & Management, 26 – 27 February 2011, BIET, Jhansi, Paper No. 118, Page Numbers 754 - 761, ISBN:  93 – 80697 – 69 – 4.
  • Dwivedi V.K., Gupta S.K., Finite Difference Method Analysis of Hybrid Bearing, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), 6 – 8 June 2011, S. V. NIT Surat, Gujarat, Paper No: DD 84, Page Numbers: 240 – 244
  • Singh A.P., Paul A.R., Gupta S.K., Jain A., Experimental Analysis of Flow Separation Control over a Hump, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), 6 – 8 June 2011, S. V. NIT Surat, Gujarat, Paper No: TF 10, Page Numbers: 318 – 322.
  • Srtivastava S., Application of VSM for Identification & Elimination of Mudas: A Case study of for Small Scale Pipe Industry in Indian Context, 1st International Science Congress, Mahaja Ranjeet Singh College of Professional Science, Indore, 24-25 Dec. 2011,  Paper No: 23.

 

Conference (National)

  • Dwivedi V.K., Chand S., Pandey K.N., Analysis of pressure and temperature variation using neural network back propagation learning method,  15-18 Dec., 2011,  26thIndian National Congress, The Institute of Engineers (India), Karnataka State Centre, Bangalore.
  • Soni D., Singh B., Gupta S.K., Dwivedi V.K., Paradigm change in education for sustainable development, National Conference on Leading Change the Revolving Dynamics,  19 – 21 Feb., 2011, GLA University, Mathura, Paper Number: 35.
  • Gupta S.K., Dwivedi V.K., Yadav A., Sharma A., Geothermal energy resources and utilization in India: An eco-friendly approach for sustainable development, National Conference on Eco-friendly Manufacturing for Sustainable Development, 19 – 21 Nov. 2010, GLA University, Mathura, Paper Number: 40.
  • Mausam K., Sharma V.K., Arif M., Gupta S., Study of Green Chemicals and their impact on Environment, Green Engineering and Technology, National Conference on Eco-friendly Manufacturing for Sustainable Development November 19-21, 2010, GLAITM, Mathura.
  • Saxena K., Sharma K., Evaluation of Poisson’s Ratio of Carbon Nanotubes (CNT) in different directions, National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20 and 21 2010, Paper No. 37
  • Gupta S.K., R.C. Mehta, Modeling of Hydraulic Jump Characteristics in Horizontal Prismatic Channels, Golden Jubilee National Conference on Modeling and Simulation in Heat Transfer and Fluid Flow (MSHTFF), 9-10 July 2010, NIT Jamshedpur, Paper No- MSHTFF 03.
  • Singh A.P., Paul A.R., Ranjan P., Gupta S.K., Numerical Investigation of Flow Characteristics over Backward Facing Step for Different Inclination Angle, National Conference on Eco – friendly Manufacturing for Sustainable Development, 19 - 21 November 2010, GLA University Mathura, Paper No. 30.
  • Pandey S.N., Gupta S.K., Tomar A., Kumar A., Post Combustion Carbon Capture Technology, National Conference on Eco – friendly Manufacturing for Sustainable Development, 19 - 21 November 2010, GLA University Mathura, Paper No. 56.
  • Sharma K., Bhardwaj B., Analysis of Disc Brakes in transient thermo-elastic conditions using ANSYS. National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20and 21 2010, Paper no.58.
  • Gupta S.K., Dwivedi V.K., Yadav A., Sharma A., Geothermal Energy Resources in India: A Review, National Conference on Advance in Mechanical Engineering, Mechanical Engineering Section University Polytechnic, 27 – 28 November 2010, Aligarh Muslim University, Page Number 263-2666, ISBN: 978-93-80697-33-8.
  • Arif M., Mausam K., Sharma V. and Gupta S., Study of Green Chemicals and their impact on Environment, National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20 and 21, paper no.29.
  • Gupta S.K., Pandey S.N., Dwivedi V.K., Gautam A., An Eco – Friendly Renewable Energy Resource for Production of Electricity in Hilly Areas: Micro Hydro, National Conference on Eco friendly Manufacturing for Sustainable Development, November 19-21, 2010, GLA University, Mathura, paper no. 12.
  • Nanda V.N., Environmental Friendly Manufacturing Systems for Improved Sustainability, National Conference on Eco friendly Manufacturing for Sustainable Development, November 19-21, 2010, GLA University, Mathura, paper no. 27.
  • Dwivedi V.K., Gupta S.K., Pandey S.N., A Study of Environmental Impact Due to Construction and Operation of Dam, National Conference on Eco friendly Manufacturing for Sustainable Development, November 19-21, 2010, GLA University, Mathura, paper no. 31.
  • Ujjainwala F., Srivastava S., Application of Value Stream Mapping for Identification & Elimination of Wastes, National Conference on Eco friendly Manufacturing for Sustainable Development, November 19-21, 2010,  GLA University, Mathura, paper no. 43.
  • Sanadhya M., Singhal P., Gupta R.C., Environment friendly fuel for small Compression Ignition engine: Mahua Biodiesel, National Conference on Eco friendly Manufacturing for Sustainable Development, November 19-21, 2010, GLA University, Mathura, paper no. 55.
  • Soni D., Singh B., Gupta S.K., Dwivedi V.K., An Option for Energy Security and Environmental Sustainability: Wind Energy, National Conference on Recent Advances in Mechanical Engineering, BSA College of Engineering and Technology, Mathura, 25 – 26 March 2011,  Page Number: 239 – 243, ISBN: 978 – 81 -906515 – 3 – 0.
  • Sharma K., Mausam K., Vimal J., Srivastva S., CNT:-Strength behind composites: A Review.  National conference on emerging Vistas of Mechanical Engineering in 21st century, Anand Engineering College, 4-5 April 2011 (Published by NAROSA).
  • Mausam K., Sharma K., Arif M., Agrawal A., Future backbone of Development: GREEN Engineering and Technology. National conference on emerging Vistas of Mechanical Engineering in 21st century, Anand Engineering College, 4-5 April2011 (Published by NAROSA)
  • Soni D., Singh B., Gupta S.K., Dwivedi V.K., Wind Tunnel: A Research Tool, National Conference on Emerging Trends  in Mechanical Engineering, Faculty of Engineering & Technology, 17 - 18 September 2011, RBS College Bichpuri, Agra, Paper ID – TR 10, Page Number: 156 – 162.
  • Anand S., Sharma S., Gupta S.K., Dwivedi V.K., A Critical Review of Environmental Impact and Climate Change due to Construction and Operation of Dam, National Conference on Recent Advances in Mechanical Engineering, 25 – 26 March 2011, BSA College of Engineering and Technology, Mathura, Page Number: 234 – 238, ISBN: 978 – 81 -906515 – 3 – 0.
  • Soni D., Singh B., Gupta S.K., Dwivedi V.K., An Option for Energy Security and Environmental Sustainability: Wind Energy, National Conference on Recent Advances in Mechanical Engineering, 25 – 26 March 2011, BSA College of Engineering and Technology, Mathura, Page Number: 239 – 243, ISBN: 978 – 81 -906515 – 3 – 0.
  • Dwivedi V.K., Gupta S.K., Agrawal S.S., CFD Modeling of Flow Pattern of Rayleigh Step Bearing by Using Fluent 6.2, National Conference on Recent Advances in Mechanical Engineering, 25 – 26 March 2011, BSA College of Engineering and Technology, Mathura, Page Number: 20 – 24, ISBN: 978 – 81 -906515 – 3 – 0.
  • Singh R.P., Rawat A., Gupta R.C.,  Sarkar S.C.,  Recent Developments in Shielded Metal Arc Welding Process, National  Conference  on Recent Advances in Mechanical Engineering (RAME-2011), BSACET, Mathura, 25-26, March, 2011. pp. 182-188.

 

 

 

Admission Query 2019
Admission Query